Responses to “Chuwi Vi8”

1. 

   03/05/2015
   

    

   danielm on 03/13/2015 @ 10:59 pm

   en manupulant dans le bios de mon chuwi vi8 j'ai desactiver usb par erreur et j'ai fait une mauvaise manupulation et j'ai maintenant un ecran bleue bitlocker qui me demande cle de deveouillage mais je peut pas entrer le code avec mon clavier usb vue usb est desactiver dans le bios; pouvez vous m'aider  merci

    

    

    

   Log in to reply.
2. 

   01/05/2014
   

    

   darkroom on 03/23/2015 @ 4:32 am

   hi, Ma_bas
   I think I had the same problem I adjust by installing the chipset drivers: Intel (R) HD Graphics chipsets and after you install the touch driver.
   Its worked for me, good luck.

   Log in to reply.
3. 

   04/03/2015
   

    

   deadairshow on 04/03/2015 @ 3:28 pm

   Hi there. I am not able to get my Chuwi Vi8 to connect HDMI. The tablet in windows mode crashes and reboots when the HDMI cable is plugged in. I have been able to narrow it down to the Intel SST Audio Driver (WDM) file isstrtc.sys. When the driver is disabled, the hdmi out works but with no audio. Have you ever had this issue?

   Log in to reply.
4. 

   02/25/2015
   

    

   samuelll on 04/05/2015 @ 5:55 pm

   Got a blackscreen after doing everything as mentioned. Chuwing my nails for two months now… Don't update the UEFI firmware!

   Log in to reply.
5. 

   05/18/2014
   

    

   you-ssef on 04/15/2015 @ 11:48 pm

   hi every one ,

    

   after windows 10 installation was not OK I have decided to keep windows 8.1, remove android partition and extend windows partition but the problem is after that I cannot boot my tablet all I have when trying start it is blue screen saying :

    

   Recovery 

    

   Your PC needs to be repaired

    

   A required device is not connected or can't be accessed

    

   error code : 0xc000000f

    

   Could you please help me resolve this issue.

    

   Best Regards

   Log in to reply.
6. 

   04/19/2015
   

    

   masterchachu on 04/20/2015 @ 11:43 pm

   i played with partions and now i can only get to fastboot dnx mode waiting screen…

   plz plz plz help me

   no idea what to do 

   it is 150 100 000+ macine

   Log in to reply.
   • 

     08/11/2015
     

      

     biranit on 08/11/2015 @ 8:24 pm

     turn on with volume up pressed. you get to chose windows or android . chose windows! you ruined android when you deleted raw partition! i did the same

     you can upgrade to win 10!
7. 

   04/19/2015
   

    

   masterchachu on @ 11:29 pm

   how to install this firmware….where is H2OFFT-W.exe 

    

   Log in to reply.
8. 

   03/30/2015
   

    

   patboom on @ 8:30 am

   Hi,

   Sorry for my bad english.

   For those who had a black screen after flashing their BIOS.
   You can flash it again in blind mode.
   Prepare a pendrive with the right BIOS.Start the PC, press ESC on the board. After a few seconds, press "->" (right) one time and "Enter". Then, two times "->" and "enter". If ok, your PC is flashing bios and will boot.

   That's it.

   You can find files for 150300 on official chuwi forum : http://bbs.chuwi.com/forum.php.....d%26typeid%3D50

   
    

   Log in to reply.
9. 

   02/25/2015
   

    

   samuelll on @ 2:26 pm

   @patboom thanks for the info, but my revision is 141206690. Where can I find the proper BIOS or how can I make a backup from a similar tablet (my friend's got one too).

   Log in to reply.
10. 

    02/09/2014
    

     

    hun-and-oz on @ 6:18 pm

    Hi,

    I have a tablet with 150300xxx serial number, can I use any of these ROMs?

    Log in to reply.