- Title: iNew V3 KitKat TWRP
- Listed: March, 2015
- Last modified: 03/29/2015 1:51 am
- Version: 1.0.13
You must be logged for ROM download.
35159 total views, 1 today
18 Total favorites
Member Info
DESCRIPTION
Apologies for the downtime issues.
Re-upload of default iNew V3 KitKat Rom – Version 1.0.13
Includes LCD drivers for all types.
Updated to include TWRP 2.8.4.0 ( 2.8.5.0 has file manager issues )
TWRP is included also as serperate Download.
As before System Partition resized to allow for Custom Roms .
I wont go into details of how to install as am sure everyone knows by now 
*Edit
If you have touchscreen or LCD issue, Download attached IK.Zip and extract lk.bin into where you extracted iNew V3 KK 1.0.13 replacing previous version and reflash.
*Added Pre-Rooted Version
Note – This can only be flash if already using KitKat based Rom, If coming from JellyBean you must flash SPFlash version first.
Place iNewV3_KK_v1.0.13_CWM.zip onto SD Card and flash through Recovery.
※Please make a backup of your device before installing or updating ROM
не работает с новыми дисплеями выпуска 2015 года, дисплей в полоску, нужен драйвер дисплея!
not supported of new lcd's 2015 year release. lcd shows the stripe. i need a new driver lcd.
on photo new lcd and old lcd type
I have the same problem.I broke the lcd and the replacement works only with cxq v1.1.4. I tried also through 1.0.8 but the same problem appears, stripes.
Tried to replace your lk.bin with mine but I get boot loop at logo.
Hardware : MT6582
Model : V3
Build number : cxq_inew_v3w_v1.0.13
Build date UTC : 20140808-101207
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V34, 2014/06/11 21:48
Kernel v : 3.4.67 (builder2018@server-desktop) (gcc version 4.7 (GCC) ) #1 SMP Fri Aug 8 18:06:01 CST 2014
Uboot build v : —–
LCD Driver IC : 1-hx8394a_hd_dsi_vdo_truly_v3w
This is what MTK DROID TOOLS shows. The system boots BUT stripes on lcd
what is lk.bin did you use, that got a normally boot logo? maybe I can make it with firmware to boot normally
Wilsey's ROM did not work, checked also with his alternative lk.bin. In both cases a get stripes on the screen.
Then I copied lk.bin from the cxq v1.1.4 ROM and put it in Wilsey's ROM folder and flashed it but again no success. This time I don't get stripes which means driver is OK but I get stuck at boot logo loop.
to brizoles:
have you tried after flashing go to recovery and do the wipes?
Be more specific. Flash what? This Rom gives you stripes on the screen. You can't enter recovery to wipe.
to brizoles:
no, when you flashing correct lk.bin, when stripes are going off, and you see a normal boot logo, but phone is restarted after logo. have you going to recovery? and do wipes, when it's possibly.
You can't enter recovery on boot loop
Пожалуйста, добавьте в прошивку новый драйвер дисплея 1-eastaeon_mt6582m_hx8394a_hd720_dsi_vdo_xinli
to bobster356:
Hi,
after succesfull flashing, phone is dead, no power on, not even detected from usb on computer, do you know how to recover
thaks
Remove the battery completely.
Open Flash tools , and load a shutter.txt of a known working rom.
Goto options , option , connection and choose on usb w/o battery (without battery)
Now deselect everything and keep only preloader checked.
Press the download button.
Now , connect the small usb end to your phone.
Press and hold Power key , Vol + and Vol – , all 3 together.
Keep them pressed and now connect the big usb end to your PC.
The phone will wake up , install the drivers and flash tools will start loading.
Keep the 3 buttons pressed (These are the test switch) during the flashing procedure.
When you get the green check , release the buttons , unplug the usb from PC.
ik.bin is not working with your rom kitkat 1.0.13 …but inew v3 kitkat 1.0.4 official is working fine i want upgrade miui port rom on inew v3 ver.4+new lcd driver can you help me please..?
http://soft-business.com/andro.....device-510.html …….lollipop rom….for inew v3
I see that several people are complaining about blank screens. I have the same issue but I'm afraid it might be hardware problem.
One day after perfect functioning of the ROM – the display started flickering and then it completely died.
Whatever I flash now (JB or KK -1.0.10. 1.0.13. 1.1.4) – it boots up, the phone starts, I can even blindly unlock it, but the display shows nothing. I am using a small program called droid@screen and I manage to see my display transfered on my PC, so I can confirm that the phone is alive! So do you think I can rule out the driver issue and assume it's a hardware issue ?
P.S I opened the phone , almost fully disassembled it, cleared the pins where the LCD cable goes… but still no effect. Do you reckon I should spend 60-70$ on a new lcd board and digitiser ?