Ulefone
  • Title: MT7-L09 Unbrick Firmware
  • Listed: 02/18/2015 4:16 pm
  • ROM Version:B133SP11
  • You must be logged for ROM download.



Overall Rating : 7

7404 total views, 1 today

1 Total favorites


  

MT7-L09 Unbrick Firmware

Author adMember Info

CodeRed


DESCRIPTION


Unlocked Bootloader Device, only work with kitkat installed global device 

- Unpack Zip file,

- Start device bootloader/fastboot mode (Reboot or open your Mate in fastboot by holding Volume Down+Power for 10 seconds and plug it.)

- Run flash_all.bat

Good Luck..


Share Button

※Please make a backup of your device before installing or updating ROM


13 Responses to“MT7-L09 Unbrick Firmware”







  1. 01/17/2014
    Posts: 30

    Have you more infos about this rom?





  2. 08/10/2014
    Posts: 2

    Abi sağolasın çok işime yaradı,benim bi sorunum daha var ama o başka bi cihaz, system folder elimde var bunu system.img'a çevirebilir misin upload etsem ? 





  3. 08/11/2014
    Posts: 2

    merci beaucoup

     





  4. 08/07/2015
    Posts: 1

    Thãnk you so much !!! :)

    Best regards from Lisbon Portugal

     





  5. 11/02/2014
    Posts: 1

    target reported max download size of 471859200 bytes
    sending 'cust'(191583 KB)…
    OKAY [ 19.905s]
    writing 'cust'…
    FAILED (remote: Command not allowed)
    finished. total time: 19.907s
    target reported max download size of 471859200 bytes
    sending sparse 'system'(456405 KB)…
    OKAY [ 48.728s]
    writing 'system'…
    FAILED (remote: Command not allowed)
    finished. total time: 254.708s
    rebooting…

     

     

    note unbrick





  6. 01/20/2016
    Posts: 1

    Hello, i flashed this but when it restarts phone its stuck on boot loop and cant starts. Any advice how to fix this?





  7. 02/09/2016
    Posts: 2

    boas,Eu vou éprocesar a Huawei…





  8. 02/09/2016
    Posts: 2

    tenho o mesmo problema depois de atualização de 5.1.1 para 6.0 beta o meu huawei MT7 L09 ficou no logatipo da huawei e não sai ,fui para uma loja deles o assistente da loja disse me que tem de trocar a placa toda que ficava por 150 euro issi éum robo na cara das pessoas falta de respeito.com éque um ero de software vai daneficar uma placa palhaçco eles vao ver o que trocar placa .boa tarde 





  9. 03/30/2016
    Posts: 1

    At the end is rebooting and got stuk at the rescue mode screen with error…..Func NO : 10 (boot image) and Error NO : 2 (load failed! )….any ideea ? Thnx in advance !

     





  10. 05/14/2016
    Posts: 1

    merci beaucoup cela fait la deuxième fois que cette rom me sauve la vie de mon mt7 je la garde précieusement.


Leave a Reply

You must be logged in to post a comment.

banner