Responses to “Updated MoKee ROM for TCL M3G”

1. 

   05/05/2014
   

    

   jtnmartinho on 01/12/2016 @ 2:22 pm

   Nice rom. I'm on a UMI eMAX mini, with a TCL M3G rom. : )

   Led notification is working, but after a while I had to charge the phone but the led didn't turn on until I've rebooted it. Even tryed to turn led on and off in settings, but it didn't start.

   No FM Radio. This one is working, install it if you need it: https://drive.google.com/file/.....NDZJZkNBREdJOWM

   The battery modes seems not to be working – at least I don't see changes on Kernel Auditor.

   Very poor antutu score on v6.0.1: 27911, with both cpu and gpu set to performance. I didn't try it on stock rom. I've got like 24000 on my Samsung S3 Neo GT-I9301I (Qualcomm 400 overclocked at 1.7mhz and 1,5gb ram), so I'm a bit disapointed with my new phone.

   Whould like to see some costum kernel to this roms.

   Anyway, thanks for the amazing work porting roms to this phones. : )

   Cheers!

   Log in to reply.
2. 

   05/05/2014
   

    

   jtnmartinho on 01/13/2016 @ 1:31 pm

   I have a lot of lag on this phone. It has better specs than my other phone, a Samsung S3 Neo, but I didn't experience any lag on the S3 – playing the same games.

   I've tried to downgrade the resolution and dpi, but nothing changed – to 720p at 320 dpi. It would ease the GPU work.

   I'm on a eMAX mini, and I barely tryed the stock rom, so I can confirm the lags there.

   Going to try another CM12.1 rom for TCL, maybe it's rom related – I hope so. : )

   Log in to reply.
3. 

   05/05/2014
   

    

   jtnmartinho on 01/16/2016 @ 1:44 pm

   Can anyone confirm that low battery led notification doesn't work on this rom?

   Can anyone confirm that battery profiles (balanced, performance, etc.) don't work – at least they don't change governors?

   Anyone had any reboots?

   Thanks! : )

   Log in to reply.
   • 

     11/30/2015
     

      

     dreamerworks on 01/27/2016 @ 2:27 pm

     Hi, 

     I have the real TCL M3G and not your UMI eMax Mini. I have this ROM installed since early December. 

     I have the antutu score below 30000 too. The phone does not lag (or very very little). I had about 6 random reboots. The battery saving mode seems to work, because it turns on automatically when battery is low and when it kicks in it seems to make phone last more. I haven't tried different battery profiles.

     The notification led also seems to work most of the time but occasionally gets stuck with notification light on. 

     Battery is lasting almost 2 days with a moderate use.

      

      
4. 

   05/05/2014
   

    

   jtnmartinho on 02/04/2016 @ 9:41 pm

   Found a newer build of Mokee rom for TCL M3G, but I could not find any info about it, or a change log. I'm trying it, but didn't notice any changes or improvements, everything is working as usual – the led is not fixed.

   I was reading the russian forum – http://4pda.ru/forum/index.php.....#038;p=46814118 -, translated to english, and someone posted a new cm12.1 version – cm-12.1-20151217 UNOFFICIAL-Q39. When I was trying to know more about it, I've found that Mokee build.

   I've uploaded both roms to gdrive, so it's easier to for everybody to download them.

   MK51.1-q39-201511301426-UNOFFICIAL.zip: https://drive.google.com/file/.....iew?usp=sharing

   cm-12.1-20151217-UNOFFICIAL-q39.zip: https://drive.google.com/file/.....iew?usp=sharing

   Changelog for cm-12.1-20151217-UNOFFICIAL-q39 (translated from russian)

   • Last git-cut CyanogenMod
   • ZTE Screen Assistant
   • По умолчанию включена USB через отдалка

   
   Errors:

   • Sometimes it does not work spillage by double tapu
   • Sometimes it does not work the automatic brightness adjustment

   Both roms were downloaded from here: http://wangpan007.com/share/us.....er/157916

   Try them, and please share the roms on the TCL M3G page on this site, it was great if someone do that. : )

   I'll try the cm12.1, to see if it's any better.

   Log in to reply.
5. 

   11/24/2013
   

    

   mmollik99 on 03/02/2016 @ 12:22 am

   Is there any way to use Xposed Installer in this Mokee Rom. I have tried one flashable zip of xposed given at 4pda tcl m3g forum, but that caused me boot loop! So again is it possible to use xposed in mokee?

   Log in to reply.
   • 

     05/05/2014
     

      

     jtnmartinho on 03/02/2016 @ 12:35 am

     Hi!

     I really advise you to try the latest cm12.1 build from varotone – available here on needrom. I'm using xposed v80 for android 5.1, with no problems.

     http://forum.xda-developers.co.....d.php?t=3034811

     Cheers! : )
6. 

   11/24/2013
   

    

   mmollik99 on 03/02/2016 @ 3:32 am

   Thanks.

   Log in to reply.
7. 

   02/03/2016
   

    

   sirocenec on 03/06/2016 @ 11:28 am

   It's very fast ROM and everything seems OK except one thing … The phone immediately freeze and then restarts on ite own once any incoming call is caoming from other country. Local phonecall from any other network is OK. Foreign phonecalls causes this problem only. I mean ..this is weird and  I hate it as the ROM seems to be really good and I like it how fast the phone works with such a ROM. The stock ROM LeWa is tooo lazy comparably to this,one !!  

   Any idea why phone restarts after incoming call from abroad?

   Thanks for any ideas.

   Log in to reply.
8. 

   03/14/2016
   

    

   moshe3150 on 09/06/2016 @ 8:34 am

    Can I install this on rum in umi emax mini

   Log in to reply.
   • 

     05/05/2014
     

      

     jtnmartinho on 09/06/2016 @ 9:53 am

     Hi moshe3150! : )

     No, first you need to convert your phone to a TCL M3G. There are better roms for you to install, this one is old and has no support.

     Try this one, it's the best yet, and follow all the instructions to convert your phone and install it. Please be really careful, only do something if you're really confident on what you're doing. It's not that hard, but you can brick your phone.

     https://www.needrom.com/downlo.....217-unofficial/

     If you have any doubts, or need help, register and ask on the forums mentioned on the rom's link.

     Take care! : )
     J
9. 

   01/24/2016
   

    

   screenman on 09/29/2016 @ 3:34 pm

   I have rooted the phone with Kingroot and loaded the TWRP recovery rom. I then installed "MoKee" – works great – but cannot get data to work properly. The best I can get is H+. I have tried changing the settings repeatedly but to no avail. Everything else works great – much better than the TCL version.

   What are the settings I should use.

   Log in to reply.
   • 

     05/05/2014
     

      

     jtnmartinho on 09/29/2016 @ 3:41 pm

     Hi!

     Don't use this old rom. Switch to varotone build of cm12.1.

     
     https://www.needrom.com/downlo.....217-unofficial/

     Cheers! : )
10. 

    01/24/2016
    

     

    screenman on 09/29/2016 @ 4:01 pm

    Tried that one as well – and even the August 2016 version of CM12.1. All give me the same result – so it must be a setting somewhere if no one else is

    complaining about it.

     

    Log in to reply.