• Title: A721 (All Allwinner A10 Chips Are Supported)*
  • Listed: 06/19/2014 2:26 pm
  • ROM Version: 4.0.4
  • You must be logged for ROM download.

Overall Rating : 5

16889 total views, 3 today

6 Total favorites


Author adMember Info


Allwinner A10 is a brand of chip which is installed in china tablets! this rom supports each and every a10 chip! the install instructions can be seen here in this video! 


And here also

The Rom Version is :4.0.4
Modded! Custom Rom! Tested

Here is the instruction from Futeko.com that I used.  (Download link at the bottom)

  • Please note that the update wipes the tablet's internal storage and starts from scratch. So you will lose all downloaded Apps and data. If neccesary back up your data first!
  • Firmware must be flashed using a Windows application called Livesuit. Download it from the link to the left.
  • Once downloaded, and before attaching your tablet to your PC, run the file 'LiveSuitPack_v1.07.exe' from within the Livesuit folder. This should install a new device on your system (VID_1f3a_PID_efe8). This device may show with an exclamation mark in Windows Device Manager, this doesn't matter and can be ignored.
  • Now download the firmware image you want to install. Firmwares are linked to in the downloads section to the left. After decompressing the archive you will end up with a .img file (e.g. 'sun4i_crane_t01a_0.8.1_20120224.img'). This is the firmware/ROM image that you are going to flash (or copy) to the tablet.
  • Without attaching your tablet to your PC run 'LiveSuit.exe' from within the Livesuit folder. You should get an application with 6 icons.
  • You will be asked if you want to be guided through the process, select no.
  • Click on the leftmost icon (a cube), browse to your downloaded firmware image, and select it.
  • Turn the tablet completely off. The tablet should be off throughout the update process.
  • Now attach your tablet to your PC by USB cable whilst holding down the volume+ button on the top. Straight after attaching the cable, and whilst still holding down the volume+ button, start pressing the tablet power button repeatedly (approx 1 press per second for 10 seconds is enough). This procedure puts the tablet into update mode.
  • After a few seconds a window will pop up on your PC asking if you want to perform a forced firmware update. You can release volume+ at this point. Select yes. You will be asked if you're sure. Select yes.
  • The update will start and will take take approx 3 minutes to complete. You will see a % complete progress bar during the process and will get a dialog saying OK when it's done.
  • Turn your tablet on and you will have the new firmware.

DOWNLOAD LINKS (I uploaded the file in Mediafire for easier and faster download)

                                     Livesuit 1.07

The Rom Has Many Versions but in some of them problems are apperaring such as
1.)battery draining fast

2.)Tilt Not Working Etc
This is only for A721 Mainboard Firmware Version 4.2.0
Visit My Blog For More Fun! 


※Please make a backup of your device before installing or updating ROM

8 Responses to“A721 (All Allwinner A10 Chips Are Suppor”

  1. 08/09/2014


    vlllllww Caaraaaa funcionou perfeitamente no meu HOTT T201 
    thanks man, works perfect on my HOTT T201 Tablet PC

  2. 06/18/2013


    A721 Mainboard Firmware Version 3.0.0 Need please post rom


  3. 06/18/2013


    A721 Mainboard Firmware Version 3.0.0 

  4. 08/23/2015


    Gracias por compartir, descargando y probando en una tablet con allwinner A10, veremos como funciona

  5. 04/07/2016


    Hi, can you help me with  ROM (firmware) for the tablet below? Thank you.

    [ro.build.description]: [A721_V2.0.6_20130226_a269_35f3e58]
    [ro.build.display.id]: [20130319-LY-F1.2.0.6]
    [ro.build.fingerprint]: [softwinners/crane_a721/crane-a721:4.1.1/JRO03C/20130226:eng/test-keys]
    [ro.build.host]: [brn-lilong]
    [ro.build.id]: [JRO03C]
    [ro.build.product]: [crane-a721]

  6. 03/11/2017

    voy a checar si funciona en una skynex sp716 porque llevo muchas probando y ninguna funciona

    I'll check if it works on a skynex sp716 because I've been testing a lot and none works

  7. 10/25/2017


    tenes alguna rom para un celu pcbox modelo i316 gracias


  8. neokarx


    dios te bendiga (Y)

Leave a Reply

You must be logged in to post a comment.