Welcome, visitor! [ Register | Loginrss

  • Title: BLUBOO_S1_TWRP_321
  • Listed: 12/31/2017 1:28 pm
  • ROM Version: BLUBOO S1 Helio P25 L V04 20170908
  • You must be logged for ROM download.

Overall Rating : 7

5754 total views, 2 today

7 Total favorites


Author adMember Info


TWRP 3.2.1 for BLUBOO S1

Based on Android 7.0 firmware ver.BLUBOO_S1_Helio_P25_L_V04_20170908 / 2017年 09月 11日 星期一 15:57:08 CST

WARNING!! Strictly follow these installation instruction!

1. Enter to fastboot mode, Unlock bootloader using "fastboot oem unlock" command
2. Reboot to the system
3. Enter to fastboot mode again, and flashing TWRP using "fastboot flash recovery recovery.img" command
4. Enter into TWRP and Install the "Magisk-v15.1.zip" path
5. Reboot to the system
6. Install the MagiskManager-v5.5.2.apk

※Please make a backup of your device before installing or updating ROM

8 Responses to“BLUBOO_S1_TWRP_321”

  1. 01/14/2017


    this is base on real twrp or carvi cwm? im going to change if this work with twrp couse now im using CWM. tq

  2. 11/04/2017

    United States

    Спасибо, всё работает.

  3. 02/07/2018


    I tried it twice but no f..n way to make it work.

  4. 07/25/2014


    Unlock operation is not allowed.  This is the message on adb terminal,  I try in 2 laptops, wou can fix this?

  5. 07/03/2014


    Hi and first of all thanks for your effort with porting TWRP to the S1. I've an issue though (not due to your work, I know!). I haven't the sw version you talk of but the one downloadable here:


    (which according to the thread on XDA is the latest one). It is MOLY.LR11.W1630.MD.MP.V9.3.P44, 2017/12/07 18.43. It has changed the name for my device to S1a.
    I've had the version you speak of but it gave me a lot of problems (especially battery wise) while this one is fine so I was forced to upgrade.
    The problem is that TWRP says data is encrypted (I've tried all the usual workarounds, formatting data and making a factory reset, everything to no avail) and I can't even mount USB-OTG. I've tried to install supersu by adb sideload but it fails too. It's clear that your TWRP isn't suitable for this version: what can I do? I'd like to install supersu.
    Thanks in advance for your reply and have a good day!

  6. 07/03/2014



    You need to tap five times on build number under system informations to activate the developer options. From there (I mean the developer options), you need to allow oem unlocking then you need to reboot in fastboot mode (just use minimal adb and fastboot and write "adb reboot bootloader"). When you are in fastboot mode, just write "fastboot oem unlock", read on the lcd and press volume up to confirm as adviced there. Have a good day! :)

  7. 07/03/2014


    I apologize, I was in an hurry and I've written the baseband version, not the build one in my previous message. The build version of the software currently on my S1 is:


  8. 08/25/2018

    I can't see the link to download twrp for bluboo s1 ..
    Please assist or send to


Leave a Reply

You must be logged in to post a comment.