• Title: Cheetah TWRP 3.0.2-1
  • Listed: 11/18/2016 6:23 pm
  • ROM Version: Cheetah TWRP 3.0.2-1
  • You must be logged for ROM download.

Overall Rating : 3

898 total views, 1 today

91 Total downloads


Cheetah TWRP 3.0.2-1

Author adMember Info

Cleopatra Bianchi


Cheetah TWRP 3.0.2-1

Based on CUBOT_CHEETAH_5281C_V01_20160427 firmware


This twrp works ONLY on the old firmware CheetahPhone


Before to flash this recovery, I strongly recommend you the following steps :


1) Download & install the "adb-setup-1.4.2.exe" from the next links :


2) Connect your phone to your pc with USB cable.
3) Open cmd prompt and type the next command :

adb reboot bootloader (and press enter)

4) Your phone will reboot into FASTBOOT mode. Now, type the next command :

fastboot oem unlock (and press enter)

5) Take a look to the screen of your phone. You will see a WARNING message.
6) Press VOLUME UP to confirm to unlock the bootloader.
7) You will see in the CMD prompt the next messages :

"Start unlock flow" … and when it will be finished … you will see "OKAY".

8 ) Restart your phone in normal mode.
9) Now you can flash the TWRP custom recovery with SP Flash Tool.

Share Button

※Please make a backup of your device before installing or updating ROM

2 Responses to“Cheetah TWRP 3.0.2-1”

  1. 07/29/2015
    Posts: 9


    Unfortunately this doesnt' work – touch screen in twrp gives no feedback!

    Specs of my phone 100% as in description. Boohoo, no root for this phone

  2. 12/16/2014
    Posts: 2


    Unfortunately this doesnt' work – touch screen in twrp gives no feedback!
    I have the same Problem…

Leave a Reply

You must be logged in to post a comment.