• Title: Custom Rom UleFone Power3S Ghost45 V3
  • Listed: 04/02/2018 11:00 pm
  • ROM Version: Custom Rom V3
  • You must be logged for ROM download.

Overall Rating : 3

3881 total views, 1 today

1 Total favorites


Custom Rom UleFone Power3S Ghost45 V3
Custom Rom UleFone Power3S Ghost45 V3 - Image 1

Author adMember Info




UleFone Power3S Custom Rom Ghost45 V3



Based Official Firmware:

Android 7.1.1
Version n: GQ3056MF2_HCS986A_ULEFONE_20180316_G14
-Based Android 7.1 Official
-Pre root with Busybox
- Xposed
-GravityBox (must be activated after the 3" Step Attention Please …supersu must be installed first )
- Recovery Twrp  By Ghost45
- New melodies added
- mod for vodafone tethering
- New tricks and Several apps
- New navbar icons
- SuperSu must be installed after installed the custom rom through flashtool.


How Install The Custom Rom V1
1) Step
Download the new firmware.
Unzip the compressed file
Phone off without usb cable ….connected!
Run Flashtool version octa-core ….. select the file scatter,
and then check that all flags are selected  
also check if in the menu in the top is selected firmware upgrade
and then push the button download (green arrow) in flashtool …… NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.n progress…..

2) Step (Necessary)
This Step is to receive the right root at 100%
(in android 6 & 7 Chainfire have found one new exploit to receive right root correctly in one temporary partition )
1) reboot in android system after flashing process ..firmware in the step 1
2) So..copy in your exsternal SD card the file supersu xxx 2,82.zip
2) Restart the device in recovery (modded) run installing the compressed file and reboot in android system and you will find the supersu app and  the right root .
3) Step

activate the gravitybox

and Xsana or xperia buttons for change menu icons


Attention Please!!!!

Probably in new device the ulefone have change the hardware and probably after flash the rom all of you will see the double screen , i think is that because is different from the original version of power 3s.

To resolve All of you must reflash the original rom from ulefone web official site.



Many Thanks to:
The Great Needrom Admin SOCRATE


※Please make a backup of your device before installing or updating ROM

Donate with PayPal to ghost45

16 Responses to“Custom Rom UleFone Power3S Ghost45 V3”

  1. 06/01/2014

    Czech Republic

    Can you tell me exactly how to do a new installation? Remaining memory will remain. 3000MB. Magnification to original value is only storage formatting. When I first set automatic restore of twrp so after installing superSU phone bootloop.Encrypted storage makes me upset. Can this be removed somehow?

  2. 07/05/2014


    works greet 

  3. 05/19/2018


    Hey man, you're a legend :) the only one having actual working custom stuff for this phone.

    Question though, how can i install magisk instead  of SuperSU? with official rom, always if flash magisk after TWRP , it bootloops/restarts, didn't want to try that with yours.

    Can i install magisk "AFTER" supersu then remove superSU?

    Thanks again for the good work :) waiting hard for a Lineage OS or RR port!

  4. 09/04/2014


    can i intall this t power 3 or i brick the device?please respond….

  5. 12/26/2015


    Must I install the v1 of this rom or I can dirty flash direct, I means flash this V3 direct to my phone

  6. 12/26/2015


    I flash this custom ROM many times successful but my phone always give me pure stock ROM after flashing

  7. 08/02/2018


    as newbi into this field of expertise, I followed all the steps, in step one, mentioned above to the note, Checked in device manager (com ports )   if mediatek da usb com, mediatek preloader mtk usb debug and mtk usb port are there and they are. Followed step by step but nothing seems to be happening. Connected the phone, which is off after pressing download, ticked usb checksum also. Phone is Ulefone power 3s. Does anybody have any suggestions?

    As said, I'm really new into this field and it is my first rooting attempt/event.

    thank you,


  8. 08/02/2018


    So, Im came as far as being able flashing my phone, not sure how one can check if it is really flashed.Nevertheless no errors occured during running the flas tool.

    following the instructions mentioned above I need to install supersu. But how?

    attached a picture of my recovery screen, quite interesting in finding that one.. Supersu is copied on my SD card. here above it doesn't explain that well how one should install supersu on the power 3s.

    Thus, how should one proceed in doing so? slowly but surely I'm learning.

    my previous issue was resolved when I found out I was missing an inf file, which couldn't be installed due to windows 10 security settings. I disabled them via GUI, recovery mode W10. click on 7. this disabled the security check on .inf files.

    shutdown.exe  – It’s a Command-Line application which is inclusive with Windows. It does various kinds of restarts and shutdowns.

    /r – means “restart”

    /o – means “the PC should start in the Option menu”

    /f – means “restart directly and close all opened programs immediately”

    /t 00 – shows the time until the restart happens (in seconds). In this case 0 seconds, which equals an immediate restart

    In the last step and after another restart, you are able to install unsigned drivers by using Windows “Device Manager”. Don’t get confused. There still will be a question in the beginning, to install untrustworthy drivers , ignore it, and just allow but nevertheless the installation of the driver will be possible without problems.

  9. 08/14/2018


    i flashed your  custom rom but now i havew problem with the screen ( it's double)

    • 02/11/2017


      If you havent fixed it yet.

      Do the Setup of your phone (skip all google parts) and then apply the wireless update.

      This worked for me.

      Then you can try to flash this rom again.

  10. 02/11/2017


    Hello, I tried flashing this rom and got this weired scattered screen… Then i flashed the stock rom from ulefones website and i still had this weired screen… Then i did the phone setup and it asked me to install ota update.

    I did this update and the screen is back to normal, but now i have a red writing on my screen at the top right side showing "未写入key" which translates to "Key not written".

    Does someone know how i can get rid of this?

Leave a Reply

You must be logged in to post a comment.