- Title: Cyanogen Mod 13 Marshmallow for Lenovo Vibe X2 EU by Append from 4PDA
- Listed: October, 2016
- Last modified: 10/26/2016 12:56 pm
- Version: CM13
You must be logged for ROM download.
27635 total views, 2 today
18 Total favorites
Member Info
DESCRIPTION
Cyanogen Mod 13 Marshmallow for Lenovo Vibe X2 EU
ONLY FOR Vibe X2 EU!!!
As will work for CU, TO, AP it is unknown.
What works:
• Wi-fi
• Sound
• GPS
• Communication
• Camera
• Bluetooth
• Sensors
• Access point
What doesn't work:
• DoubleTap
• Illumination of touch buttons.
• Light indicator
Bugs:
• Authorization of Google in the Setupwizard (fall Google services after login, you can skip and after login at startup PlayMarket)
• Applications using codecs (VC, and other players) may fail.
• Libwebviewchromium.so Library is not fully compatible with IMGSVR. (Applications such as AliExpress, steam and others using this library can fail).
• Encryption.
• No charging interface, when the phone is switched off.
• Modem always works in LTE is eating batteries.
• Strange eating battery in WiFi.
Installation:
Installing ONLY from TWRP of the version not lower than 3.0.0.0
1. Wipe Dalvik/cache/system/data.
2. To choose archive with an insertion and to stitch.
3. At will at once to establish GAPPS'Y (the first authorization we pass)
Due to the breakage of the laptop, work on improvement of CM13 are postponed indefinitely. As soon as works are resumed, there will be a separate message and updating is laid out.
※Please make a backup of your device before installing or updating ROM
Release cm13 for lenovo vibe x2 ap
link ?
OR CM14
I’m so’sorry… For other devices, there is no data, I only Vibe X2 EU. Sorry …
Hello, installed with TWRP? that version? It does not include Gapps, which can be installed?
Yes, the installation of TWRP, not less than version 3.0.0.0. Other information in the subject header.
i'll provide u any files or data u need but please make a rom for ap
Not I did this ROM, address Append with 4PDA.
can u ask him i don't know how to contact him.
Follow the link, be registered, communicate…
http://4pda.ru/forum/index.php.....#038;p=53729376
Hi guys,
My phone is vibe x2 cu. I installed VIBEUI_V2.5_X2-CU_X2-AP_ROW_S223 a couple of months ago. So my vibe x2 cu was converted into vibe x2 eu. I installed this ROM, GAPPS for CM13 and "TWRP-X2-CU_1520_modemfiles.zip" and "TWRP-X2-Generic_NVRAM.zip". Download the file from (http://forum.xda-developers.co.....t2897967/page28 (post #280)
Had no problem with the rom so far. Hopfully this will be more stable than the stock rom. Hope it helps!
So your phone from CU converted to AP and not EU …
Which TWRP you used to flash the cm-13.0-20161025-UNOFFICIAL-For_EU file?
I couldn't install the update
. I have a CU device
I installed an ROW_S223 EU Rom and TWRP 3.0.2.0, and when i try to install the zip file from recovery i take this fault
Had to try!!!
Sorry for the error .. x2 cu was converted into x2 ap after installing VIBEUI_V2.5_X2-CU_X2-AP_ROW_S223. So I installed this rom first. Then I installed Cyanogen Mod 13 Marshmallow for Lenovo Vibe X2 EU by Append from 4PDA. The steps to install both the roms are the same:
1. Run flashtool.exe
2. Under "Format Tab" select "Format whole flash except Bootloader"
3. Turn off phone and connect to PC
4. Press "Start"
5. Once done go to "Download Tab"
6. Choose the Scatter file from folder "target_bin"
7. Select "Downlolad Only" or "Firmware Upgrade"
8. Press "Download"
9. Once done start your phone
10. Extract TWRP_3.0.0.0.1.zip and install it in the phone via Flashtool.exe. Set Mode to "Download only" so that only "recovery" option is checked.
11. TWRP will be installed
12. To go to recovery: Press and hold both volume buttons and power buttons.
13. Copy files "UPDATE-SuperSU-v2.462.zip";"TWRP-X2-CU_1520_modemfiles.zip" and "TWRP-X2-Generic_NVRAM.zip" to your phone
(http://forum.xda-developers.co.....t2897967/page28 (post #280))
14. In TWRP: Install> TWRP-X2-CU_1520_modemfiles.zip then
Install> TWRP-X2-Generic_NVRAM.zip
then > UPDATE-SuperSU-v2.462.zip
15. Reboot and your phone should have network, IMEI and root.
(To be honest I genuinely hate this phone. It still sometimes types double and triple letters. Applications can freeze at times. I will never recommend this phone to anyone. I don't have much budget at the moment so I'm stuck with this phone for a while)
Installed the rom, just leave me 2 gb of storage, just to install the system and nothing more. What happened to the remaining 30 gb ?.
I can not even install the GAPS
In all, it's okay, but you have a problem.
Instructions read?
Did Wipe Dalvik/cache/system/data?
If you did and did not give effect, then you have another fake with 16 GB of RAM.
Hello, finally the rom istaly and running. I needed to install the patches that put ryonnasc a few messages back. Many thanks for everything. If you could get the buttons to work, it would be fantastic.
OK, it works, I'm not sure yet about data but no bootloops on the X2-CU model, which is good. The OS is in russian or something, but you can change that right away in setup. GJ, ROM poster. Kudos to you.