- Title: ECOO E04 Plus-VIBE Lenovo K3 Note porting
- Listed: February, 2016
- Last modified: 02/18/2016 5:02 pm
- Version: VIBE S205 151118 ROW
You must be logged for ROM download.
20247 total views, 7 today
4 Total favorites
DESCRIPTION
Flash the ROM zip (TWRP) to install it.
You will find all the steps to install it (and further suggestions) at the next link :
http://www.chinaphonearena.com/forum/Thread-ROM-ECOO-e04-Plus-VIBE-Lenovo-K3-Note-porting
UPDATE 01 – STRONGLY RECOMMENDED :
TWRP 3.0.0.2 – New BusyBox – New SuperSU – New Init
For further informations please visit the next link :
3C TOOLBOX PRO – RIGHT VALUES – STRONGLY RECOMMENDED :
For further informations please visit the next link :
UPDATE 02 – MULTIBOOT IS POSSIBLE !
Please follow carefully the steps at the next link :
http://www.chinaphonearena.com/forum/Thread-Tool-MULTIBOOT-on-Ecoo-E04-Lenovo-K3-Note
※Please make a backup of your device before installing or updating ROM


Member Info
Hi Joseluvaz96 !
Sure … the mic works well. If you wish to increase all audio parameters (mic included), I suggest you to tap on "Settings", tap on "More", tap on "Engineering settings", tap on "MTK Settings", tap on "Hardware Testing", tap on "Audio" and change ONLY Max Volume (as soon as possible I will suggest you how to change the "Value" too … because every ROM has its proper Values parameters). Then, you have to change Max Volume in "Normal Mode" & "LoudSpeaker Mode". WARNING : The Max Volume is 160 , but a lot of people advise against to set the max volume to 160 because it could damage your phone. Set the max volume to 150 is more than enough.
i have the same problem with the mic in MIUI, when i record i hear a strange sound, can you try it? maybe is my phone but i dont know :/
Hi Hi Joseluvaz96 !
Look, I'm telling you this from my experience : forget the MIUI (on Ecoo E04)
To solve your issue … try to tap on Dolby Atmos, then tap on "Music" and set ON "Dialogue Enhancer" & "Volume Leveler" … same steps on "Voice".
Do you have increased the Max Volume in "Engineering settings" ? Reboot the device after any change in "Engineering settings".
And the sound works very fine, the problem is in the microphone, and i cant solve it
Hi Joseluvaz96 !
It's so strange ! We (the italian developer & me) will analyze it as soon as possible. Meanwhile, I suggest you to enroll on Chinaphonearena forum … so we'll be able to communicate the whole time
thanks for all,
thanks for your work.
i notice that torch lamp doesn't work. OVERHEATING ISSUE always here and sytem reboot and crash after 30 min when i use TOMTOM gps.
Regards
Dear Joseluvaz96,
I HAVEN'T ANY MIC ISSUE on my Ecoo E04 Plus with VIBE porting installed … I have made additional tests yesterday.
If you prefer the stock rom … I don't know what to say to you … BUT KEEP THAT IN MIND : the stock rom has the awful issue of overheating … the stock rom consumes more ram than VIBE porting … the stock rom has less free space on the system partition than VIBE porting … the stock rom is less performant than VIBE porting !
Hi aioli !
The overheating issue has been solved … trust of me. I never had any system reboot or crashes. Do you have followed carefully my steps on Chinaphonearena forum ?
are there any plans to make a firmware for MT6753?