- Title: Emui 3 G4S port
- Listed: May, 2015
- Last modified: 05/14/2015 10:32 pm
- Version: 4.4.2 B265
You must be logged for ROM download.
18374 total views, 2 today
4 Total favorites
Member Info
DESCRIPTION
Here I present you my EMUI 3 ota ROM for Jiayu G4S. Ported from Huawei H30C (yes from 6582).
Remember our device is 6592!
The first real EMUI 3 for Jiayu G4S , with working storage , auto-light and without AAL
Multilanguage.
(Those who know will undestand)
—————————————————————————————————————————————————-
Installation
—————————————————————————————————————————————————-
You ***MUST*** first install my base (to make the partitions correct – system is over 1.46gb)
Get it from here. https://www.needrom.com/download/base-for-flash-tool-jiayu-g4s/ Follow instructions from the post.
Backup your NVRAM and Sec.ro partitions before the format with MTKDROID tools. (better be safe than sorry!) It can be fixed anyway so don't worry.
Transfer my zip rom to your SD or internal after you finish with base.
Turn off phone , plug to pc via usb while holding vol+ and pressing power button for short time … enter recovery.
Do a factory wipe (If you already have my base and you didn't format whole phone).
Go to install. Choose storage where you saved zip.
Select correct zip file (G4Shuawei.zip after unzipping the downloaded rom) from storage.
When finished , restart to system from recovery.
Wait a bit longer than normal , Rom rebuilding data. Done! Enjoy!
—————————————————————————————————————————————————-
Rom has native init.d Support , Superuser and Busybox support. Support full SU adb out of the box.
Compass , wifi , bluetooth , GPS all ok.
All GAPPS included and updated to latest version. Rom has almost everything you need to start using it.
I have been working on this rom for almost one week!
If you like it , please donate something via Paypal for my effords (Those who have donated already understand the work put my roms!)
PS : Rom doesn't support engineer menu , search Huawei forums for how to enter test mode etc. It is just like the original.
※Please make a backup of your device before installing or updating ROM
What error you get? It should say above the error.
Did you install base first? System size is too small on normal G4S kk
Sorry, How i can't install base from flas tools, i install first the room oficial jiayu 4.4.2 and after install this rom. Another question, bluetooth works fine with car connection? Thanks.
Official Jiayu is ok , now take nvram backup with Mtkdroid tools.
Then follow instuctions on my base rom page. You must format flash and re-install base ….
Without it the rom will NOT fit in system partition!
Dunno about car , I don't have a bluetooth equipped car to test it! Connects to PC and headphones etc etc.
Что За дерьмо недоделанное. делаешь порт или конструктор?
Читайте инструкции и сократить сквернословие!
If you follow instructions correct you will be fine.
A) don't try to install over existing Kitkat system , you NEED to resize system partition with my base.
B) Read instructions
Мои слова подтверждаются IMEI слетает без восстановления!
Вот вад разжованно FAQ
Cane you do this rom for g4sl?
I must fix base for it first , then I think it will work as they are very similar!
Pls do it if you cane
Best rom so far !!!!! 5stars…