• Title: [CM12.1] [Stable] [P6000 Pro] [2016.06.05]
  • Listed: 06/08/2016 1:11 pm
  • ROM Version: Android 5.1.1
  • You must be logged for ROM download.

Overall Rating : 6

2113 total views, 2 today

3 Total favorites


Author adMember Info


Credits and Source:


Canogenmod 12.1

Date of build: 2016.06.05

Status: Stable and Final

Release: For custom recovery


Fixed charging

Fixed engineer menu

Fixed fm radio

Fixed all lags and freezes

Memmory fully fixed



Boosted boot up speed

And many other


No bugs, all stable and fast


ROM can be set through recovery that is below



Download, rom and Gapps that is below:

Copy ROM and Gapps on SD card.

Flash recovery in Flashtool.

Enter in recovery.

Go to "Wipe and format data" by the volume button and press power (Action – accept).

Make Wipe data factory reset and clean to install a New ROM.

Choose "+++++Go Back+++++".

Enter in "Install Zip".

If ROM and Gapps on SD:

Choose zip from /storage/sdcard1. 

If ROM and Gapps on internal storrage:

Choose zip from /sdcard. 

Choose ROM : cm_p6000_pro_ota…

Wait ~2 minutes

Next step.

Move back, go to install and Flash Gapps.

Reboot, and wait. First boot – 5 min.

p.s If you want install Gapps after already installed ROM, you need to flash Gapps and make Wipe Cache and Dalvik Cache

Download Gapps:

Choose: Arm 64, Android 5.1, Nano or Pico



※Please make a backup of your device before installing or updating ROM

Donate with PayPal to nightshade_pt

13 Responses to“[CM12.1] [Stable] [P6000 Pro] [2016.06.0”

  1. 02/10/2016


    IMEI/GSM working but I'm losing Phone number. Fix it please :P
    Generaly ROM is good.

    ~Elephone P6000 Pro \\2gb version

  2. 07/24/2013


    The last final version is not working.. 1% batery all time… Phone closed and can't boot!!!

    Why do you say "No bugs, all stable and fast"???

  3. 11/06/2013


    I say in first line topic:

    Credits and Source:


    Rom it's not mine.

    But, you this step?
    "Make Wipe data factory reset and clean to install a New ROM."

  4. 07/24/2013


    Yes my friend. I did "Wipe data factory reset and Clean tominstall a new Rom".

    I always do Wipe data factory reset when install a new Rom.

  5. 07/24/2013


    @nightshade_pt did you try this Rom without problem?

  6. 06/11/2016


    reading this:


    does not to be stable!

    • 07/24/2013


      Not only is not stable but can not be used at all, because very quickly battery goes to 1% , the phone is closed and cannot be recharged. It remains permanently at 1%. The only way is to flash a stock Rom via Sp Flash Tool.


  7. 05/17/2016


    This ROM bricked my phone. It didn't report the battery status correctly and eventually it made the battery stay all time at 1%. It was impossible to recharge the phone, it maybe turned on every 2 hours or so for maybe 1 minute and then the phone turned off again.

    DON'T USE IT, TAKE THIS ROM OUT OF HERE. I got a brick because of it. I'm reflashing the phone but even after using the Flash tool my phone isn't working normally. Maybe the battery was damaged and I couldn't turn on the phone because of that, I still don't know (I'm waiting for a spare battery).


    • 05/17/2016


      OK, I finally managed installing the last Stock ROM with flash tool. I think that probably I'll go back for the 28-03 image, which was working OK for me, but I'll do that when I'm sure the phone is working OK.

  8. 06/13/2016


    Not working… battery 1% and don't charge. DO NOT FLASH! BUGS

  9. 01/11/2017


    The battery goes to 50 % —- 1 % in 10 seconds and then not charge.

    This rom no work,please removed it.

Leave a Reply

You must be logged in to post a comment.