[FIRMWARE] Android Lollipop 5.1 for MyPhone Rio 2 Craze (MT6572)

You must be logged for ROM download.

Overall Rating : ★★★★★ 5

16878 total views, 1 today

5 Total favorites

OFFICIAL

Author ad Member Info

[FIRMWARE] Android Lollipop 5.1 for MyPhone Rio 2 Craze (MT6572)

Compatible with the following devices:

MyPhone Rio 2 Craze (MT6572)

Wiko Sunset 2 (MT6572)

Micromax Bolt D303 (MT6572)

Micromax Bolt D304 (MT6572)

Instructions:

Extract the Firmware Package using Winrar or 7zip
Install the USB CDC Drivers. If you can’t install the USB CDC Drivers, then install Tinno USB Driver instead, and follow on screen instructions. (If you have already installed USB Drivers before, then skip this step)
Turn off your phone and remove the battery
Open SP Flash tools folder inside the Firmware Package
Open flash_tool.exe
Go to the “Download” tab
In the “Download” tab, click on the “Scatter-loading” button.
Now locate the scatter file in the “Firmware” folder inside the Firware Package
Select “MT6572_Android_scatter.txt”
Under the”Scatter-loading”, click the drop down list and select “Firmware Upgrade”
Click the “Download” button to start the flashing process
Now, connect your phone to the computer using USB Cable
If your phone is detected, the flashing bar at the bottom of SP flash tools will start loading until the flashing process is complete and a check mark will appear
If your phone is not detected, attach the battery
Once the flashing is complete, disconnect your phone from the computer, attach the battery and turn it on

Congratulations!!! You have upgraded your phone to Android Lollipop 5.1!!

Special thanks:

Tek Kos – for sharing this firmware

How to fix Invalid IMEI on Lollipop 5.1:

※Please make a backup of your device before installing or updating ROM

Responses to “[FIRMWARE] Android Lollipop 5.1 for MyPh”