- Title: Geisha Build 3.12.13
- Listed: December, 2013
- Last modified: 12/16/2013 4:18 pm
- Version: 3.12.13
You must be logged for ROM download.
20424 total views, 2 today
CUSTOM
Member Info
DESCRIPTION
※Please make a backup of your device before installing or updating ROM
Hi,
but with this ROM there is always the problem of drivers that are incompatible on the different models?
I just read on another Rom for N9500 that the problem was solved forever.
Thank
for the drivers there is 2 solution :
1-first flash this rom https://www.needrom.com/wp-con.....-VIA-SP-MDT.zip via SP MDT and chose drivers,then reflash this rom via recovery.
2-tommorow i will upload the SP MDT flashable rom the way you can choose the drivers.
thanks,you did it again.
love this rom,very fast.
by the way did you hear about the king rom evolution ?
data conection is not working, what should I do?
welcome to support team @leparisien
.
try activate from settings,if not work swap the SIM cards or patch the base band.
N9500 4Gb http://dfiles.eu/files/w4snh3d.....t4 .
N9500 8Gb http://dfiles.eu/files/4i9fp41.....l5
please let me know.
please could you check if the APN (acces point name) are correctly configured?
settings,mobile network,access point names,choose the 3g sim,there you will find the informations
also mobile network settings,if 3G preferred is selected.
I have done swaping the SIM card and patching the base band and still no conection
also gps not working, dont know what's the problem,
hummm,no GPS no 3G,did you make a full clear clean before flashing,dalvik,cache and factory?
yes i did, also format system and batery
the problem was the APN, it was not configured, i had to doit manual, and now I can say its a great rom, Thanks nakbe
thanks for your feedback,please could you provide the operator and the country the way to prepare a patch for next release?
movistar, mexico
I knew.
With SP MDT I had brick my phone and now it will not turn over and it is not even recognized by the PC.
How do I fix it now?
unplug the battery ,wait 2 minuts,run SP MDT ,load the scatter,press start,plug the phone without battery,wait 1 minut if nothing happend just plug the battery and wait,some times take up to 5 minuts to be detected.
No it does not work even in this way.
Does not work in any way.
Forget it
I'm looking for help everywhere
what you choose as LCD driver?
try first flash this firmware via sp flash tool
https://www.needrom.com/wp-con.....21-160914_PC.7z
please use the lastest SP tools
USE FIRMWARE UPGRADE NOT DOWNLOAD
when finish,the device should turn on but no display.
then reflash Geisha build via SP MDT or your backup rom via SP tool ,please choose the right LCD driver.
also please could you provide the file SPMultiPortFlashDownloadProject.ini inside the SP MDT folder,to understand the souce of the issue?