Responses to “HDC Galaxy Note 3 Sunny”

1. 

   01/03/2014
   

    

   iniesta_jog on 02/20/2014 @ 6:54 pm

   front camera and gprs are null as well as the colors of red ….. someone can fix this problem? indeed as the friend says below there is no recovery except house?

   Log in to reply.
2. 

   02/07/2014
   

    

   e.miron on 02/26/2014 @ 3:20 am

   Hi. I have tried all combinations of drivers for secondary camera, no joy. Can someone with a working copy of ROM for N9002 send it to me at emanuelmiron@yahoo.com please?

   Log in to reply.
3. 

   10/21/2013
   

    

   danieles7180 on 02/26/2014 @ 3:22 pm

   For E.Micron:
   Install ad.exe
   Extract SP mpd tool to desktop\spmdt tool
   Open SPMultiPort…. app
   Open file > download agent> MTK_AllinOne
   File> scatter > MT6589 ANDROID SCATTER emmc
   Selce sensor band LCD>unlock
   Main sensor gc2235mipi
   Sub sensor gc2235mipi
   LCD don’t touch
   Start All
   Connect the phone

   Wait complete download (green)
   Remove and reinsert battery
   Open Phone power +vol up +home
   Wipe user data
   Wipe cache
   Reboot
   Enjoy

   Log in to reply.
   • 

     02/07/2014
     

      

     e.miron on 02/27/2014 @ 2:56 am

     Hi and thanks for your support. I tried this and still no front camera. I have three options for driver : 

     1. imx111_mipi_raw   –   Back camera OK, front camera none.

     2. gc2235_mipi_raw   –   Both cameras disabled

     3. ov5648_mipi_raw.  -   Both cameras disabled.

     Can you make a CWM backup of your Rom and send it to me, please, at emanuelmiron@yahoo.com ?.

     You can make a backup of your phone as it is now, them reset to factory, make another backup , send the second backup to me and then restore your previous backup. This method is to ensure that the ROM is clean and there is no data personal to you in the backup. 

     Thank you very much.

      
4. 

   10/21/2013
   

    

   danieles7180 on 02/26/2014 @ 3:28 pm

   Main sensor is same of sub sensor because is a interpolate camera driver. OK?

   Log in to reply.
5. 

   01/03/2014
   

    

   iniesta_jog on 03/03/2014 @ 1:33 pm

   let's see …. I had the same problem and congratulate DANIELES7180 the tutorial that works …. 
   I leave my settings … 
   1. imx111_mipi_raw - 
   2. gc2235mipi_raw - 
   2. RX_572R_808A - 
   I first format the internal memory SP_Flash_Tool_v3.1320.0.174 .. 
   intale with following up with the bladed SP_MDT_exe_v3.1304.00_A2013.02.26

   Log in to reply.
   • 

     02/07/2014
     

      

     e.miron on 03/17/2014 @ 2:14 pm

     Hi, how do you format with spflash tool? I have two options, format whole flash and format all except bootloader. Which did you choose?.
6. 

   01/03/2014
   

    

   iniesta_jog on 03/21/2014 @ 12:08 am

   check the second box that comes by default — ( format whole flash except bootloader ) ….. advice, never check the first box that lose the bootloader and it will be impossible to restore the terminal … greetings

   Log in to reply.
   • 

     02/07/2014
     

      

     e.miron on 03/26/2014 @ 2:13 pm

     Hi. Just did that. Still no joy. Can you make a cwm backup of ypur phone and send it to me at emanuel.miron@yahoo.com, please?.
7. 

   01/12/2014
   

    

   Klai on 07/02/2014 @ 12:48 pm

   Is there any new rom for this?

   Log in to reply.
8. 

   06/14/2016
   

    

   Hujnya on 08/27/2016 @ 5:29 pm
   If you have the new firmware specifically for this phone, please give a link

   Log in to reply.