• Title: HTC First AT&T
  • Listed: 05/15/2017 2:16 pm
  • ROM Version:1.08.502.4
  • You must be logged for ROM download.


Overall Rating : 0

302 total views, 1 today

  


Author adMember Info

Wajid


DESCRIPTION


HTC First Maintenance Release Instructions 7.31.2013

 

 

 

 

This software upgrade available for your HTC First provides the following key enhancements:

AT&T LTE Enhancements

Details

Before you proceed, please confirm that this software upgrade to 1.08.502.4 is a newer version than what is currently loaded on your device.  If it is the same version, there is no need to reload the software. Navigate to the Home screen then tap All apps >Settings>About >Software Information and locate the Software version. If your Software number is less than 1.08.502.4, you should proceed with the upgrade.

WARNING: During the upgrade process the device will reboot multiple times and show software upgrade screens. Do not remove the AC charger as this might stop the update and your device may be rendered inoperable!

Getting Started:

Before you proceed with the update, make sure you have done the following:

Set aside approximately 20 minutes to allow the device to update, possibly longer based on Wi-Fi network speed

Connect the device to a charger

Ensure the battery is charged to at least 30%

Connect to a stable Wi-Fi network to download the software file.

Installation instructions:

To manually perform the update, follow these steps below:

From the Home screen, tap All apps and then tap Settings.

Tap AT&T Software Update.

Tap Check for updates.

Tap OK to download the update.

After you select your method of download, you will be prompted with a Wi-Fi or Data fee warning message. If this is acceptable, tap OK to start the upgrade process.

The status of the download can be viewed in the Notifications pull down.

Once the download is complete, you will be prompted to install from the Notifications pull down menu. Tap the System update notification to begin the upgrade process.

Tap CONTINUE to begin the update process to software version 1.08.502.4.

The device will reboot and begin installation. You will not be able to use your device during the installation process (approximately 10 minutes). 

System update complete. Tap OK to continue 

Manual system update instructions:

If you are outside of AT&T/Wi-Fi coverage, or the update is not found, you may perform a manual system update. This process requires that you download and install HTC Sync Manager first in order to get the proper drivers. If you do not have HTC Sync Manager installed already, you may download the software from http://www.htc.com/www/software/htc-sync-manager/.

WARNING: Performing the system update manually will delete all information from the device. Ensure all information is backed up before proceeding. See the Help &How To section of this website for more information on backing up your device contents.

Performing the ROM Update:

Download and save the HTC First™for AT&T ROM update to your PC.

Connect your device to your PC via the supplied USB cable.

If the device is not recognized by the PC, ensure you have HTC Sync Manager installed and then disconnect and reconnect the device from the USB cable.

Once the device is properly recognized on the PC, locate the HTC First™for AT&T ROM Update that you downloaded. Double-click on the file to launch the system update wizard.

Follow all of the system update wizard instructions shown on your PC.

Once the update is complete, click Finish in the Wizard and the device will reboot.

Once the device reboots, the initial setup wizard will appear.

Once the initial setup process is complete, the device is ready for use.

 


Donate with PayPal to Wajid

Donate with YANDEX to Wajid

Share Button

※Please make a backup of your device before installing or updating ROM

Leave a Reply

You must be logged in to post a comment.