DESCRIPTION

Follow the full process to unlock frp from below frp file

• First of all, Download all the files from the download section.
• Once all the files downloaded extract the Huawei Y6 Prime FRP File and FRP Tool.
• There you will see "2" files.

1. SP Flash tool.zip.
2. FRP Files folder.

• Well now extract the SP Flash tool there.

• Once extracted, open the SP Flash tool extracted from the folder.
• Now find there SP Flash Tool.exe, Then run the SP Flash tool.exe from there.
• After that, click on the Download Agent tab, and give the file path of the Download Agent file (you can find it on Cubot P30 FRP File folder) and then press the open button.

• Then click on the Scatter-loading, then give the file path of the Huawei Y6 Prime MTK Scatter file (File should be in the FRP file) folder and press the open.
• Now go to the Format tab by click on the "Format" icon.
• Then check the Manual Format from there.

Make Sure:- Before you connect your device you need to install Huawei USB driver on your PC.

• Then Open the "SP Flash Tool" and then click on the "Start" icon from there.

• Now Connect your Device.

1. First Power Off your Device.
2. Then connect your device to the computer using a good USB cable.

• Then check on the Huawei FRP Tool a green line will appear.
• That's mean your device flashing will be started.

Note:- If your Huawei Y6 Prime not detected on the SP Flash Tool, Then reinstall USB Driver and restart your PC and then follow the whole process once again.

• Once flashing finished, then you will get a pop-up window.
• Then disconnect and power on your device.
• Great, you have successfully done Huawei Y6 Prime FRP Bypass.

※Please make a backup of your device before installing or updating ROM