- Title: Inew V3 Zopo 1000s port
- Listed: November, 2014
- Last modified: 03/16/2016 8:20 pm
- Version: 4.4.2 1.2
You must be logged for ROM download.
49140 total views, 16 today
3 Total favorites
Member Info
DESCRIPTION
Here I present you my Zopo 1000s Modded ota ROM for Inew V3.
It is for the internal /data/media type phones. (with only MBR and EBR1). System is part5 data is part7.
Port 100% from Zopo 1000s – GESTURES finally work in INEW (See photo)
Installation
—————
You must first install official KK 1.13 (to make the partitions correct)
If you don't have it I can build a small Flash tool update. —–>Request!
Backup your NVRAM and Sec.ro partitions. (better be safe than sorry!) It can be fixed anyway so don't worry.
Transfer my zip rom to your SD. Insert SD in phone.
First flash my recovery with your favorite program (Mobile uncle or via Flash tool <—- prefered)
Reboot phone , enter recovery.
Press Wipe (Default one wipe data , davlik , cache – BACKUP impotant data , all will be lost) .Then wipe internal.
Return to main menu after finished.
Go to install. Choose storage microSD at the middle-bottom
Select correct zip file from microSD
When finished , return to main menu and POWER off phone
Remove microSD and Start phone.
Wait longer than normal , Rom rebuilding data. Done!
Rom has native init.d Support , Superuser and partial Busybox (Install busybox from play store and update)
ADDED FLASH BASE FOR FLASH TOOLS -Not for those who don't know what they are doing!
How to install.
1) Back up your phone with flash tools.
2) Unzip my pack
3) Add inside the unpacked folder my recovery image , named recovery.img
4) Add inside the unpacked forder YOUR nvram.bin and secro.img from your backup from flash tools folder! VERY important as this retains your IMEI! Later you can simply download a newer nvram.bin if needed! Can't give you mine as it contains my Imeis!
5) Load flash tools , load MT6582_Android_scatter.txt from the folder and choose (format all and download) and press Download. ATTENTION this will totally wipe your phone!
6) Turn off your phone , remove battery. Keep it removed! Connect first usb to PC then to your Phone. It should start downloading the base. Notice you will not have a system , cache and userdata partition yet after it finish!
7) Unplug USB , put battery back on , turn on phone by pressing volume up at the same time. This will take you in recovery. Now , goto wipe , and Advanced wipe. Fist choose system , Swipe to wipe. Then Cache , Swipe to wipe , then go back and format Data , type yes to wipe. This is very important and should be done exactly like this as it formats the blank system.cache.data partitions , making them ready to accept data!
Notice you will now have 1.4gb system , 256mb cache and the rest data!
Copy my rom to your SD and follow the step to install via TWRP after you reboot in recovery again (You will have no system yet!)
9) Enjoy new partitions and never loose imei again!
—————————————————————————————————————————————-
Updated for phones with replaces screen by popular request. Camera set to Inew standards too .
※Please make a backup of your device before installing or updating ROM
smart wake not working do you no how to get it to work ???
never used it to be honest! If you turn off your phone , system can't interact with booting it back on!
I can't mount my SD card to PC
((! Any ideas. It works on my older Kitkat Rom.
use MTP , not usb storage!
Is GPS working fine in this rom?
GPS in most of the previous rom does not work in my phone. It just cannot fix any satellites after long searching….
Batsilos suggested in his UMI thread that my nvram needed update. check here
http://www.chinaphonearena.com.....e-tar-bin-files
and guess what. For the first time I have gps working in KK. I use zopo rom.
it took about a minute for the first time lock satellites but from then just a few secs.
thank you batsilos you saved the day. I had the phone working from 6.00 am and then ran the ATHENS marathon, listening to music, 3G, calls etc.
more than 8 hours till I came back and battery went to 52%. Excellent.
update with what exactly? what exactly do you mean?
Anybody with 850 inew v3 with problems in gps should try the nvram solution. And of course use faster fix to change gps.conf region and mobile uncle engineer mode mtk ->location based and download epo files and change ref position and change lat long to the place you are.
i tried everything and finally works.
A) Tnx for the good words , happy your phone finally works.
B) gps.conf is fixed , set for Greece
, Agps too! Thats why you finally got GPS after updating your nvram 
batsilos : mporeis na valeis to gps.conf to diko soy poy doyleyei na to perasoyme k emeis.eyxaristv
Einai hdh mesa sth ROM….. system/etc/gps.conf
Working on Vibe ui at the moment , after I finish maybe
NTP_SERVER=gr.pool.ntp.org
NTP_SERVER=3.gr.pool.ntp.org
NTP_SERVER=0.gr.pool.ntp.org
NTP_SERVER=1.gr.pool.ntp.org
NTP_SERVER=2.gr.pool.ntp.org
NTP_SERVER=0.europe.pool.ntp.org
NTP_SERVER=1.europe.pool.ntp.org
NTP_SERVER=2.europe.pool.ntp.org
NTP_SERVER=3.europe.pool.ntp.org
XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS: 0 – none, 1 – Error, 2 – Warning, 3 – Info
# 4 – Debug, 5 – Verbose
DEBUG_LEVEL = 0
# Intermediate position report, 1=enable, 0=disable
INTERMEDIATE_POS=1
# Accuracy threshold for intermediate positions
# less accurate positions are ignored, 0 for passing all positions
ACCURACY_THRES=0
################################
##### AGPS server settings #####
################################
# FOR SUPL SUPPORT, set the following
SUPL_HOST=suplcn.sirf.com
SUPL_HOST=supl.nokia.com
SUPL_HOST=supl.google.com
SUPL_PORT=7276
SUPL_NO_SECURE_PORT=7276
SUPL_SECURE_PORT=7276
# FOR C2K PDE SUPPORT, set the following
# C2K_HOST=c2k.pde.com or IP
# C2K_PORT=1234
################################
# EXTRA SETTINGS
################################
CURRENT_CARRIER=common
DEFAULT_AGPS_ENABLE=TRUE
DEFAULT_SSL_ENABLE=FALSE
# TRUE for "User Plane", FALSE for "Control Plane"
DEFAULT_USER_PLANE=TRUE