@echo off

@rem This script is called by x:\Windows\System32\Startnet.cmd – WinPE

@echo.

@echo Running Intel Optimization powercfg for improved imaging times

@echo.

@echo call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c

call powercfg /s 8c5e7fda-e8bf-4a96-9a85-a6e23a8c635c

@echo.

@echo.

@echo.

@rem *****************************************************************

@rem List all the disks, then search the volumes of each one to see

@rem which disks may have "Winpe" in the label. We will ignore that

@rem disk and use the first disk without the Winpe label that we find.

@rem *****************************************************************

@echo call diskpart /s %WinPESource%DiskpartFiles\listdisk.txt

call diskpart /s %WinPESource%DiskpartFiles\listdisk.txt>x:\Disks.txt

@echo.

@rem Set Disk equal to blank to start

set disk=

@echo.

@rem

@rem This line will write a diskpart script to select the disk and detail it's contents.

@rem We use this output to find a disk that does NOT have Winpe as the volume label.

@rem That disk will have the OS installed to it. This way you can exclude USB from diskpart.

@rem

@rem This works around the issue where the USB key is sometimes enumerated as disk 0 and the

@rem SSD is disk 1.

@rem

for /f "skip=8 tokens=2" %%A in (x:\Disks.txt) do (

@echo sel disk %%A>x:\Par.txt

@echo det disk>>x:\Par.txt

@echo exit>>x:\Par.txt

if NOT "%%A"=="DiskPart…" call :ListPar %%A

)

if %Disk%=="" echo No disk found without a volume label of "Winpe"&& set disk=0

@echo Using Disk "%Disk%"

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Write the diskpart script now that we know what disk to use

@echo *****************************************************************

@echo.>x:\wimpart.txt

@echo select disk "%Disk%">>x:\wimpart.txt

@echo clean>>x:\wimpart.txt

@echo convert gpt>>x:\wimpart.txt

@echo create partition efi size=100>>x:\wimpart.txt

@echo format quick fs=fat32 label="System">>x:\wimpart.txt

@echo assign letter="S">>x:\wimpart.txt

@echo create partition msr size=128>>x:\wimpart.txt

@echo create partition primary>>x:\wimpart.txt

@echo shrink minimum=5600>>x:\wimpart.txt

@echo format quick fs=ntfs label="Windows">>x:\wimpart.txt

@echo assign letter="W">>x:\wimpart.txt

@echo create partition primary>>x:\wimpart.txt

@echo format quick fs=ntfs label="Images">>x:\wimpart.txt

@echo assign letter="M">>x:\wimpart.txt

@echo set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac">>x:\wimpart.txt

@echo gpt attributes=0×8000000000000001>>x:\wimpart.txt

@echo exit>>x:\wimpart.txt

@echo.

@echo Wimpart.txt now contains…..

@echo.

type x:\wimpart.txt

@echo.

@echo.

@echo *****************************************************************

@echo Setting up the partition table

@echo *****************************************************************

@echo call diskpart /s x:\wimpart.txt

diskpart /s x:\wimpart.txt

@echo.

@echo.

@echo.

@echo *****************************************************************

@rem Map drive letter for Install.wim and Winre.wim

@echo *****************************************************************

@rem Create an output file containing all the drive letters

@echo call diskpart /s %WinPESource%DiskpartFiles\listVol.txt>%WinPESource%Output.txt

diskpart /s %WinPESource%DiskpartFiles\listVol.txt>%WinPESource%Output.txt

@echo.

@rem Go through each drive letter, looking for the images\install.txt file

for /f "skip=8 tokens=3" %%A in (%WinPESource%Output.txt) do (

if exist %%A:\images\install.txt set InstallPath=%%A:\images&& echo "Found device with images folder and install.txt file"

)

@echo.

@echo.

@rem Check InstallPath was found and there are images in it.

if NOT EXIST %InstallPath%\Install.wim echo "Install.wim NOT found." && goto :Error

@echo Install.wim FOUND at %InstallPath%\images\install.wim

@echo.

@rem Check that Winre.wim is there as well.

if NOT EXIST %InstallPath%\Winre.wim echo "Winre.wim NOT found." && goto :Error

@echo Winre.wim FOUND at %InstallPath%\images\winre.wim

@echo.

@echo.

@echo.

@echo *****************************************************************

@rem Switches to the USB disk

@rem Create folders on local (eMMC) disk and copy files from USB disk

@echo *****************************************************************

@echo.

@echo Making directories…

md w:\recycler\scratch

if %errorlevel% NEQ 0 echo "Failed to make w:\recycler\scratch directory" && goto :error

md m:\"windows images"

if %errorlevel% NEQ 0 echo "Failed to make m:\windows images directory" && goto :error

md m:\recovery\windowsre

if %errorlevel% NEQ 0 echo "Failed to make m:\recovery\windowsre directory" && goto :error

@echo.

@echo copy %InstallPath%\install.wim m:\"windows images"

echo.

echo Please waiting …

echo.

copy %InstallPath%\install.wim m:\"windows images"

if %errorlevel% NEQ 0 echo "Failed to copy install.wim to m:\Windows images" && goto :error

@echo.

@echo copy %InstallPath%\winre.wim m:\recovery\windowsre

echo.

echo Please waiting …

echo.

copy %InstallPath%\winre.wim m:\recovery\windowsre

if %errorlevel% NEQ 0 echo "Failed to copy winre.wim to m:\recovery\windowsre" && goto :error

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Applying the WIMboot image from the Images Partition in the eMMC

@echo *****************************************************************

@echo call DISM /Apply-Image /ImageFile:"m:\windows images\install.wim" /ApplyDir:w: /Index:1 /WIMBoot /ScratchDir:w:\recycler\SCRATCH

DISM /Apply-Image /ImageFile:"m:\windows images\install.wim" /ApplyDir:w: /Index:1 /WIMBoot /ScratchDir:w:\recycler\SCRATCH

if %errorlevel% NEQ 0 echo "Failed to apply image to w:" && goto :error

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Copy over a custom unattend.xml if it exists to Windows\Panther

@echo *****************************************************************

@echo.

@echo if EXIST %WinpeSource%images\unattend.xml xcopy %WinpeSource%images\audit\unattend.xml w:\Windows\Panther /y

if EXIST %WinpeSource%\images\audit\unattend.xml xcopy %WinpeSource%images\audit\unattend.xml w:\Windows\Panther /y

@echo.

@echo *****************************************************************

@echo Copy over Test tools to \TEST_TOOL

@echo \TEST_TOOL SHOULD BE DELETED PRIOR TO SHIPPING

@echo *****************************************************************

@echo if EXIST %WinpeSource%TEST_TOOL\START_FUNCTIONAL_TEST.cmd xcopy %WinpeSource%TEST_TOOL w:\ /y /s

mkdir w:\TEST_TOOL

if EXIST %WinpeSource%TEST_TOOL\START_FUNCTIONAL_TEST.cmd xcopy %WinpeSource%TEST_TOOL w:\TEST_TOOL\ /y /s

if %errorlevel% NEQ 0 echo "Failed to copy TEST_TOOL to w:\TEST_TOOL" && goto :error

@echo.

@echo xcopy %WinPESource%Scripts\1_START_TEST.cmd w:\TEST_TOOL\ /y

xcopy %WinPESource%Scripts\1_START_TEST.cmd w:\TEST_TOOL\ /y

if %errorlevel% NEQ 0 echo "Failed to copy 1_START_TEST.cmd to w:\TEST_TOOL" && goto :error

@echo.

@echo.

@echo xcopy %WinPESource%Scripts\2_StartOA3Tool.cmd w:\TEST_TOOL\ /y

xcopy %WinPESource%Scripts\2_StartOA3Tool.cmd w:\TEST_TOOL\ /y

if %errorlevel% NEQ 0 echo "Failed to copy 2_StartOA3Tool.cmd to w:\TEST_TOOL"

@echo.

@echo xcopy %WinPESource%Scripts\3_CleanupTestTool.cmd w:\TEST_TOOL\ /y

xcopy %WinPESource%Scripts\3_CleanupTestTool.cmd w:\TEST_TOOL\ /y

if %errorlevel% NEQ 0 echo "Failed to copy 3_CleanupTestTool.cmd to w:\TEST_TOOL" && goto :error

@echo.

@echo xcopy %WinPESource%Scripts\checkupkey_v1.2.exe w:\TEST_TOOL\ /y

xcopy %WinPESource%Scripts\checkupkey_v1.2.exe w:\TEST_TOOL\ /y

if %errorlevel% NEQ 0 echo "Failed to copy checkupkey_v1.2.exe to w:\TEST_TOOL" && goto :error

@echo.

@echo xcopy %WinPESource%Scripts\test.mov w:\TEST_TOOL\ /y

xcopy %WinPESource%Scripts\test.mov w:\TEST_TOOL\ /y

if %errorlevel% NEQ 0 echo "Failed to copy test.mov to w:\TEST_TOOL" && goto :error

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Setting the boot environment

@echo *****************************************************************

@echo call w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all

w:\WINDOWS\SYSTEM32\BCDBOOT w:\WINDOWS /s s: /f all

if %errorlevel% NEQ 0 echo "Failed to set boot information" && goto :error

@echo.

@echo.

@echo.

@echo *****************************************************************

@echo Setting the recovery environment

@echo *****************************************************************

@echo w:\windows\system32\reagentc /SetREImage /Path M:\RECOVERY\WINDOWSRE /target w:\windows

w:\windows\system32\reagentc /SetREImage /Path M:\RECOVERY\WINDOWSRE /target w:\windows

if %errorlevel% NEQ 0 echo "Failed to set recovery information" && goto :error

@echo.

@echo.

@echo *****************************************************************

@echo cleanup other files

@echo *****************************************************************

@echo.

rmdir /s /q c:\recycler

@echo.

@echo.

@echo *****************************************************************

@echo WIMboot image deployment COMPLETE. Type EXIT from Command

@echo Prompt to restart or turn off device.

@echo *****************************************************************

goto :END

:ERROR

@echo.

@echo An error has been detected.

@echo.

goto :END

:ListPar

@REM This section is to bring a disk number and use it to List Partitions

@echo.

set TempDisk=%1

diskpart /s x:\Par.txt>x:\ParOutput.txt

for /f "skip=24 tokens=3" %%A in (x:\ParOutput.txt) do (

if /i "%%A"=="no" set Disk=%TempDisk%

)

for /f "skip=26 tokens=4" %%A in (x:\ParOutput.txt) do (

if /i NOT "%%A"=="Winpe" set Disk=%TempDisk%

)

Goto :EOF

:END

@rem

@rem Get finish time so we can evaluate total WinPE phase time.

@rem

call |time>x:\StopTime.txt

@rem

@rem Now parse both files to display the Start and Finish Time

@rem

@echo.

@echo.

for /f "tokens=5" %%A in (x:\starttime.txt) do echo Script Start Time is %%A

for /f "tokens=5" %%A in (x:\stoptime.txt) do echo Script Stop Time is %%A

@echo start writing bios

:bios

set biospath=w:\TEST_TOOL\

cd /d %biospath%

@rem fptw.exe -f T12V13POV01.bin

@rem if %errorlevel% neq 0 goto bios

PAUSE

exit

@echo.