• Title: JTY KT107 (faked noname) with root
  • Listed: 01/18/2020 12:14 pm
  • ROM Version: ROM Android 5.1
  • You must be logged for ROM download.


Overall Rating : 0


1431 total views, 1 today

  

JTY KT107 (faked noname) with root
JTY KT107 (faked noname) with root - Image 1JTY KT107 (faked noname) with root - Image 2

Author adMember Info

ksanci


DESCRIPTION


This firmware dumped (and prepared for Flash Tool) from a noname tablet, which had FAKED parameters:

 - MT6753 SoC, the real is MT6580

- Android 8.0, the  real is 5.1

- 4GB ram, 64GB rom, the real are 2GB ram, 32GB rom 

- Mali-T760 GPU, the real is Mali-400 MP

Please check the label on board inside the tablet:

KT107-D315-2+32-31PIN-20181222 

build.description: full_kt107_nl_p10-user

The parameters have been repaired, but the reported ram may still be 4GB.

Attention! This firmware is realy fake, used only 1GB memory from 2GB!

For root:

There are three files in root folder:

- place the root.img to the root of the internal SD

- flash the boot_root.img file to the boot partition with SP Flash Tool.

- you have to install the superuser.apk after reboot. If not, then any application able to get root  permission without approval.

Or just use Magisk :)  

Warning!

If SP Flash Tool says "PMT changed" – Download Only mode -, this firmware will almost certainly not works on your tablet! Flashing with Firmware Upgrade option may bricks your device!

You can check the items.ini file for lcm (diplay)- and camera drivers compatibility with your device.

 



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to ksanci


One Response to“JTY KT107 (faked noname) with root”







  1. 02/11/2017

    Russian Federation

    Hello! I flashed with your firmware and screen turns into 90 degrees. I tried all settings in items.ini. Some of them diddn't work at all. Please can you help me what can I do to return screen in normal position? The label on board inside my tablet: KT107-D315-2+32-31PIN-20181222


Leave a Reply

You must be logged in to post a comment.