- Title: kingzone Z1 backup for flashtool with nvram repair
- Last modified: 08/18/2015 1:01 pm
- Version: 4.4.4-20150509
You must be logged for ROM download.
17397 total views, 2 today
2 Total favorites
Member Info
DESCRIPTION
Hi
This is the full ROM dump for Kingzone z1 with nvram.
Dont use nvram option if your nvram is OK, otherwise
if you need nvram and flashing NVRAM too, yoou get my IMEI ! You can change imei in MTK engineering mode
(GAPPS) MTK settings-Connectivity-CDS information-Radio information-Phone1 or Phone 2
Use a standard AT commands
AT +EMGR=1,7,"imei number for phone1"
AT +EMGR=1,10,"imei number for phone 2"
Dont forget the space between AT and + because dont will be work this is the syntax!
You can save this method, because its work on all mtk phone!
No need MAUI meta and other uninstallable progs.
Better you know, every KZZ1 have a fake IMEI, the imei starting with TAC code (type allocation code) this is the first 6 digits, im check it in TAC code database, and im get my phone is NOKIA 6250i.
About the zip file. Everything zipped together, including the flashtool.
U need only unzip to folder and start flashtool exe, loader and scatter is already set.
The ROM is encrypted for the reason of needrom use only. ROM password is: abrakadabra
Good flashing 4 u!
※Please make a backup of your device before installing or updating ROM
MR. SENOREX
MY Device KİNGZONE Z1 MHAKZZ1_BLK
the same as your device ?
(Thank you for your money back)
I will se that, and write here.
My KZZ1 also dead, but some KZZ1 is work with this rom.
Im think there was a hardware change. The bad news is this kind of KZZ1 never be lollipop,
because the fingerprint sensor dont work with 64 bit lollipop.
thanks
but I'll wait again
Hi. Flashed your firmware https://drive.google.com/file/.....iew?usp=sharing with the format. And imei no. Tell me how to restore imei?
Password Beliy19813 pleace!!!
@ arafataras
I had the same problem than you and I resolve it with a backup and sunshine. If you have twrp 2.8.6.0 on your phone, I can help you.
I wantThank youI would be glad if you help me
twrp phone installed
I just want to know do you have to have rooted phone for this to work
installed this ROM, and the ROM did not detected my SIMS it was like the sims were not even placed, no sims no imei, went back to stock
@sensorex
I installed Sensorex rom, and Sensorex rom DID found newer OTA, a 0606 verison, so i intstalled it via TWRP, (after update you will be sent to TWRP you have to look for update.zip which has downloaded in the phone and manually install zip in TWRP) only difference i found: are 2 mayor ones, first, mi GPS finally works decenlty, it used to take up to 5 mins to get a fix and then lose it even with root and gps.config updated but with sensorex version, now tooks like 20 seconds! , BUT a big flaw is: camera now has issues with focus, long distance focus is not accurate and takes a little blurry pictures, i tried to replace the Camera lib files and drivers ffrom Scooby ROM (official ROM from Needrom) to the Sensorex ROM to finally have a stable ROM with GPS and Camera working, but it did not worked, Anyone has an idea how to use the drivers, camera and libs from Other ROM like official Stock to update it to This? Camera is my only Issue now, not a LOT to complain but i don't like blurry pictures, (i tried other apps for camera, lenovo super camera and FV-5 same issue with focus i did not had before updating from stock)
hi guys some help please… i have deleted al my system folders & files from my kzz1 mistakenly. i managed to install twrp recovery and aroma file explorer then i managed to copy several stock roms but my phone can not install any rom from the recovery ("no md5 file found. error flashing zip…"). would you have a solution for this please. according to aroma file explorer my system and internal memory are empty…
Hello, let me give you the solution: if you only managed to install TWRP then you are already on a right path, first download this rom: https://www.needrom.com/downlo.....pdate-20150606/ This is a backup to install directly from TWRP (backup and restore, restore) the tutorial is on the ROM page.
you can paste the TWRP Rom in the SD, TWRP backups folder and install. everything will be working fine, there are 2 verisons of the Z1, so, if you can't see the screen that means that the backlit driver is for the wrong version of the Z1 and you can install another ROM for your version of Z1 with SP flash tools, i don't know how to tell the difference between the Z1 verisons so it's all luck.