- Title: Lenovo A328
- Listed: May, 2016
- Last modified: 05/01/2016 2:06 pm
- Version: 4.4 (KitKat)
You must be logged for ROM download.
20304 total views, 1 today
8 Total favorites
DESCRIPTION
How to Flash Lenovo A328 Stock ROM:
Note: Keep in mind that prior to flash check out the battery time. It should be 70-80% charged. Backup your device data including personal data before flashing or installing firmware on your device.
Step 1: Download Lenovo A328 Stock ROM Firmware zip file in your PC and extract it. (It includes Scatter files, SP Flash Tool, and Drivers).
Step 2: Download Lenovo USB Drivers in install in PC. If already installed quit this step.
Step 3: Power Off / Switch of your smartphone (it is better to remove battery after switching if possible)
Step 4: Go to extracted folder “extracted in Step 1” > SP flash tool > you will see Flash-Tool.exe > Open this to Launch setup.
Step 5: One setup is launched Click on > Download Tab > Scatter Loading. Now locate scatter firmware file (Present firmware folder extracted in Step 1) and load it.
Step 6: Connect your device with PC via data cable (Keep in mind the device should be switch Off). Now click on Download Button / Upgrade Button (having sign of Green Arrow) to begin flash Flashing.
Step 7: Wait Until process complete. In end of Successful Flash Lenovo A328 Stock ROM Firmware, a Green dot / ring will appears.
※Please make a backup of your device before installing or updating ROM


Member Info
any one have lenovo firmware A328?
# Lenovo A328 ROW_S322_140822
# A328_ROW_S329_150708
Note: tose FW/ROM Above cant fix the dead A328 cause by lenovo FW ROW_S322_140822, even all nsuccess in flashing without error except format alone cant do.
you need 7 hours to download this rom, else you cannot download?
Thank you very much .Good !!!
thankz u very much master
Resep_Gogon
lenovo a328 dead after flash solution plz with detaills
any other version? to fix dead boot? plssss help
same problem dead after complete flash..lenovo a328.. any help please
чо за лохотрон где прошивка силка нерабочая там нет ничего