• Title: lineage-12.1-20180121-UNOFFICIAL-p6000_pro
  • Listed: 03/17/2018 1:57 pm
  • ROM Version: Lollipop 5.1.1
  • You must be logged for ROM download.


Overall Rating : 2


1356 total views, 4 today

  

lineage-12.1-20180121-UNOFFICIAL-p6000_pro

Author adMember Info


DESCRIPTION


Hello everyone
New Rom for the p6000 pro.
Tested and fully functional.
A special thanks to the developers.

Installation:
————-

Standard disclaimer:
====================================================================================
= When following these instructions, YOUR PHONE'S WARRANTY IS NOW VOID!!!          =
= Use at your own risk.                                                            =
= In other words: It is your solely choice to use these files.                     =
= I am not responsible for any damage or problems you may run into/have!           =
====================================================================================

* Make a full backup of all data/pictures/media/audio/… on your phone (from both 
  internal storage and external SD) that you wish/need to keep!
  (YOU HAVE BEEN WARNED ONE MORE TIME!!!)

* Download the following to external SD card:
  – Download a "custom recovery" IMG (such as TWRP, see above for a link to a 
    recent TWRP version for P6000 Pro)
  – Download the main LineageOS build ROM ZIP (from here)
  – Download Google apps ("GApps") ZIP of your choice from http://opengapps.org
    (see https://github.com/opengapps/opengapps/wiki/Package-Comparison for
    what is contained in the different editions) to external SD card: 
    Select ARM64, Android 5.1, and at least "nano" (I typically use "full")

* Flash custom recovery (TWRP or other) into recovery partition through Mediatek's 
  "SP Flash Tool": http://spflashtools.com/
  – Detailed instructions how to do so can e.g. be found on YouTube
    . Disconnect the USB cable and switch off your phone completely 
      (removing the battery should not be needed!)
    . Use the P6000 Pro MT6753 scatter file from the latest Elephone stock ROM 
      (K01TS-A.A.vA0S.E1.160428)
      https://www.needrom.com/category/elephone/serial-p-elephone/p6000-pro/
    . Select "Download Only" mode
    . Make sure that only the recovery partition is ticked, and point to your custom
      recovery IMG in the rightmost column
    . Click on the green Download button
    . Simply connect the USB cable back to your phone (no need to press any other key)
    . Wait until recovery upload is complete and the green tick is displayed
  – Directly boot into recovery mode after flashing, because booting into the stock 
    ROM normally will immediately overwrite the custom recovery by the stock version, 
    and you will need to start over again

* Boot into custom recovery mode:
  When the phone is off after flashing recovery has completed, first disconnect the 
  USB cable. Then press and hold both Power-On and Volume-Up until a very small text 
  "Select Boot Mode" appears, now press Volume-Up until "[Recovery Mode]" is selected 
  by the small arrow "<<==" and confirm by pressing Volume-Down

* From the recovery, wipe all data from your phone (in TWRP, everything except 
  External storage/SD card and USB-OTG)
  – Cache
  – Data
  – Dalvik / ART Cache
  – System (if possible from your recovery)
  – Internal storage (if possible from your recovery)

* From the recovery, install the main ROM ZIP: lineage-12.1-YYYYMMDD-UNOFFICIAL-p6000_pro.zip

* From the recovery, install the GApps Zip of your choice

* Reboot your phone from the recovery to normal mode and wait for the LineageOS boot logo
  to appear. The first boot optimizes all apps and will take 5-10 minutes to complete,
  depending on the size of your GApps distribution.

 



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to pamigianleo


Leave a Reply

You must be logged in to post a comment.