- Title: M-HORSE GT-7562 (BML 9500)
- Listed: September, 2013
- Last modified: 11/05/2013 1:20 am
- Version: Multiple versions
You must be logged for ROM download.
40331 total views, 3 today
150 Total favorites
CUSTOM
Member Info
DESCRIPTION
c920_JHM_E07_3D_v04 is a custom built firmware with unlocled boot (can be rooted easily) and removed Chinese and other junk apps. Use at your own risk!
The other two firmwares are stock ROMs.
※Please make a backup of your device before installing or updating ROM
thanks
how is it used?
помогити нужна прошивка 6820 2.3.5 c920 JHM E07 v06
taura zvako mwana wamai irikiunetsa fone iyoi iyi toita seiko
it icit is necessary M-HORSE 7562 6820 2.3.5 c920 JHM E07 v06
I tried to install the rom on my BML 9500 but it always fails. The phone is restored, and I can´t turn it on, so I don´t know what else can I do…
This is the message appears when I try to install:
– Install /sdcard…
Finding update package…
Opening update package…
Verifying update package…
E:signature verification failed
Installation aborted
These ROMs are not recovery updates. You have to extract the contents of the zip files and than flash your phone from your PC using the supplied flasher application.
Szia Bencebacsi.
Nincs veletlen ehhez hasonlo romod. Rendeltem kinabol egy bml s4 i9500at de nem csinaltam backupot. Felraktam ra ezt a romot elfut rajta csak nem mukodik a vissza es a menu gomb a kepernyo színei torzak lettek valamint a kamera sem mukodik . kerlek segits mert nem talalok stock romot a telefonhoz
Elore is koszonom. Balazs
need rom 6820_2.3.5_c920_JHM_E06_v08. Please, help me!
I have to have my cell phone on or off or in recovery mode to start the flashing process after starting the download research
You have to power off you phone, start the flaxhing process in RD then connect your phone to USB while pressing the vol up (maybe vol down) button.
Good day!
I'm from Russia, need very urgent firmware on bml 9500, written on the inside label C920 JHM H3 / 4 E10-C920-006. Other versions S920 probyval, poured through ResearchDownload during phase system attempts to load and throws an error Failed: Wait input time out, for whatever reason, may issue firmware? Perhaps they do not fit. Who has the help!
Chack your USB connection, try to use another cable and/or port.
About this one: 6820_2.3.5_c920_JHM_E07_3D_v04
Flashing this PAC will just completely brick your phone. RD couldn't even flash the system.img and userdata.img partitions, the procedure will stop due to "Failed: Wait input time out" error, even if you uncheck calibrations or not. Also, even flashing only the fdls and the boot.img will brick it too. I have already tried out everything, but nothing works. This PAC just bricked 2 of my handsets. I DO NOT recommend to flash any parts of this firmware.
Good advice: Flash only factory released original firmwares, don't download "usermade" customized files. Building a PAC from fullflash is always risky.
Good advice: Flash only the same version what your phone had installed originally. The provided custom firmware has been tested and works properly. On the other hand, you were warned about the risk of flashing that version. "Failed: Wait input time out" is typically not the problem of the firmware but the USB connection.