- Title: Mediapad T3 10 – W09 + L09 (Various Roms + tools)
- Listed: January, 2025
- Last modified: 01/17/2025 6:40 am
- Version: Multiple
You must be logged for ROM download.
14393 total views, 2 today
9 Total favorites
Member Info
DESCRIPTION
Multiple roms for AGS-W09 and AGS-L09
Also a kinda trick – method for temporary unlocking the bootloader and for FLASHING any ROMS:
-
BEFORE DOING ANYTHING!! it is highly recommended to take backup of emmc partitions with QFIL!!!
Since there is not much ROMS and tools to recover – not even official roms around…
-
Use AGS-W09 (old rom – Huawei-MediaPad-T3-AGS-W09C500B002) for resetting / flashing emmc…
- (worked for me to temp unlock FRP) with touching motherboard test points
- Use QFIL (Qualcom 9008) to flash it and use –> rawprogram_unsparse.xml found in folder Maincode in AGS-W09C500B002…
-
BEFORE CLICKING "DOWNLOAD" in QFIL .. make sure you have backups and you know how to recover it!!!
-
After reseting to old version (reboot by pressing power) (android symbol will appear during boot) – OLD BOOTLOADER –> FASTLY STOP IT by PRESSING POWER AND VOL DOWN (-)
–> DONT BOOT TO OLD VERSION!! –> BOOT TO FASTBOOT MODE…
REASON: FRP + BOOTLOADER STAYS TEMPORARY UNLOCKED UNTIL you boot...At this point you can install another rom on top with fastboot commands (fastboot flash) and by flashing one by one the .img (images) of any rom…
NOTE: You may need to erase all partitions with QFIL partition manager in 9008 mode but I am not sure…!!
Don't do it unless you have a backup and unless previous QFIL flash doesnt unlock the FRP / Bootloader
I accidentally erased partitions, before trying without erasing the partitions…!! LUCKY ME!! Try not to do it at first!! ALSO REMEMBER TO KEEP BACKUP BEFORE ERASING / FLASHING !!!
–> Example: Use flash.bat from dump_AGS-W09C100B251CUSTC100D001) to flash any rom images (.img)
–> I included a flash.bat for easier installation of images in dump_AGS-W09C100B251CUSTC100D001…
–> Next after I flash the dump_AGS-W09C100B251CUSTC100D001, then I found a kinda proper version
(with some bugfixes) that I found for AGS-W09 + its Android 8.0
(https://www.needrom.com/download/mediapad-t3-10-android-8-0-0-150-c431-emui8-0-dld)
(follow instructions here to flash)
——————————————————————————————————————————————-
NOTES:
- This is all I collected for AGS-W09 mostly and some for AGS-L09 after few days of work…!!
- Hope this helps people around.
- NOT my responsibility for broken tablets/phones…!!!
- NOT all roms are tested by me (especially I didnt test roms for AGS-L09 but downloaded from hisuite proxy which is reliable)
- P.S #1. If you want more versions for all regions – check hisense proxy tool…!! Its very good!
- P.S #2. You need to find the appropriate version of Hisuite and proxy that works together to download older versions.
——————————————————————————————————————————————-
Credits:
ProfessorJTJ: https://github.com/ProfessorJTJ/HISuite-Proxy/releases
XDA: https://xdaforums.com/t/huawei-mediapad-t3-10-ags-w09-ags-l09.3735471
※Please make a backup of your device before installing or updating ROM
Thank you, thanks to you, I deleted the frp lock and got my tablet back. It takes a while, you can update it with patience and use it, but don't forget that the imei is deleted, it's not a problem since I don't use it, thanks brooo
Even though I disabled adblock it gives me the same error. could you please share the files, in private?
files no problem
How do I flash with the .bat file inside the folder?
Can ags-l09 flash bd then flash ags-w09 dump with oeminfo for rebrand?