- Title: MPAI 809T
- Listed: March, 2014
- Last modified: 03/29/2014 12:10 am
- Version: ROM Android 4.3.0
You must be logged for ROM download.
21962 total views, 4 today
1 Total favorites
Member Info
DESCRIPTION
MPAI 809T custom ROM Android 4.3.0
based on stock ROM version 109_v82_hydy_hd_20131225
Language support: Multilang
Only for 1/4GB version
Modifications:
- Carliv Touch Recovery V2.1 included
- rooted, system partition is r/w mountable
- deodexed, zipaligned
- chinese crap removed
- hardware cheats removed
- data partition resized to 2.5G
Installation:
- unpack ROM file to folder on your computer
- run SP Flash Tool (as administrator!)
- open scatter loading file from ROM file
- click Firmware->Upgrade button
- connect phone without battery to USB port
- wait for green circle
- disconnect phone, insert battery
- hold down vol- key and press power button to enter CTR
- enter Wipe menu
- do Wipe Data – Factory Reset
- reboot
- internal SD needs to be formatted after bootup
※Please make a backup of your device before installing or updating ROM
Flashed and working!!! Thanks N!!!
Trying to flash through SP Flash Tool, when you connect your smartphone to a computer gives "unrecognized rom detected" and nothing more happens
You'll have to download SP-Flash-Tool-v3.1332.0.1872.rar (see above link). This is reported to work (thanks to https://www.needrom.com/author...../jadecore78/ for hint).
WORKING very FAST and stable .. Now i writing using this rom. Thanks i’m writing a custom 4.2.2 based
My phone has 2GB RAM and 4GB internal SD.
Flash it, working fine, but can't mount internal SD and see only 300MB RAM.
Any suggestions ?
Your phone has only got 1GB RAM. The original ROM is cheating.
Internal memory is repartitioned as you read above: data partition is 2.5GB, the remaining 300MB can be used as internal SD.
Very Nice rom
hi to all, in this ROM the front camera work??? thanks in advance.
Fully WORKING.. Also Best battery performance
thnx
hi.
Why, when i click on "Frimware Upgrade" , nothing happens and it remains at 0% ?
Did you install VCOM preloader driver to your computer?
No, I didn't.
When i connect the device (without battery) , you can hear a sound "beep", and another "beep" after 2-3 seconds.
I have to install Vcom preloader driver however?
(if yes, where I can find it and how to install?)
thanks.
See http://chinamobiles.org/thread.....ry-flash.33276/ for instructions and download link.