• Title: SM-N900 (MTK6592)
  • Listed: 04/09/2014 2:22 pm
  • ROM Version: 4.3
  • You must be logged for ROM download.

Overall Rating : 8

7304 total views, 1 today

771 Total downloads


Author adMember Info


New rom directly from Factory.

Flash with SP Flash Tool.

Only for the new SM-N900 with MTK6592 chip.

Donate with PayPal to Azza

Share Button

※Please make a backup of your device before installing or updating ROM

14 Responses to“SM-N900 (MTK6592)”

  1. 03/15/2014
    Posts: 5

    United States

    Finally I been Looking for the stock rom for a very long time!!! THANK YOU! Will the be a KitKat rom for this Note 3 MTK6592? If there please let me know! Thank You!

  2. 04/07/2014
    Posts: 8




    I have no idea about KitKat, just got this from Factory.


    Have you tried it?

    If yes, on what device?


    I have problem finding roms that work on my device..

  3. 05/01/2014
    Posts: 1


    Please could you find a rom for the cds9002 or guophone g9092 please

  4. 05/04/2014
    Posts: 5

    United Kingdom


    i got this rom from ibaby888 off dhgate to use on the phone i bought from him note 3 clone 

    mtk 6592 2gb ram 16gb rom but show 32gb rom…the rom that was on the phone when i bought it was ok except it kept rebooting randomly with no reason or warning…then i eventually got this rom after many emails to ibaby no more random reboots BUT now the proximity sensor is very weak 

    you have to swipe your finger over the sensor very closeley to get air gesture to respond and when your answer call screen comes on unless to press phone firmly against your ear not good.

    anyone else having issues like this….plus are there any other roms for this phone ??

    • 04/07/2014
      Posts: 8



      I also got this from ibaby and I have the same problem with the proximity sensor.

      Good to hear that it seems to be the rom and not the phone.

      Do you have a backup of the rom you had before?

      Only other rom I have found is the other one I have posted, that was on the phone when I got it.

      Probably same as your old, but I had no rebooting issues.


      BTW, it's only 1gb RAM I think, not 2GB and the screen is 720×1280, not 1080×1920 as ibaby claims.



    • 09/11/2013
      Posts: 37


      for the sensor problem just type *#0*# and scrool down and chose psensor calibration , be carefool to make calibration when number are low and test it . worked for me.

  5. 05/04/2014
    Posts: 5

    United Kingdom

    Hi Azza

    i think these chinese sellers are all mostly liars they change things in the software so specs show false

    in some software progs like antutu but i too have found screen res is only 1280 720 not sure about the ram always shows 2gb but its definiely not 32gb storage.

    i did make a backup of original rom but cant get it to work in flashtools  

  6. 05/04/2014
    Posts: 5

    United Kingdom

    where is your original rom from the phone when you got it ? 

  7. 04/07/2014
    Posts: 8



    That's my original rom.

    It's 16GB storage.

    Check how little RAM you have left, will say 100-300MB only, if you would have 2GB RAM then you would have a lot more free ram.

  8. 05/04/2014
    Posts: 5

    United Kingdom

    Hi Azza

    tried your old rom didnt work for me seems to be missing parts preloader etc:

  9. 04/07/2014
    Posts: 8


    You would only need to flash system.img from that rom if you have a working phone already.

  10. 04/09/2014
    Posts: 3


    I fixed the rebooting issue on the goophone n3 from ibaby888 by factory reset my phone. I did this by pressing volume down+home+power button. Dont get freaked out that it is in chinese, just choose the one that says something about EMMC:)


    I will try the thing with the gesture sensor and test it today

Leave a Reply

You must be logged in to post a comment.