NYX FENIX Claro Solucion para Colombia | [Official] 04/20/2017 on Needrom

Title: NYX FENIX Claro Solucion para Colombia
Last modified: 04/20/2017 4:43 am
Version: vanzo72 cwet kk

You must be logged for ROM download.

Overall Rating : ★★★★★ 4

16111 total views, 1 today

OFFICIAL

Author ad Member Info

Listed by: EljarKer
Member Since: 10/10/2015

DESCRIPTION

FIRMWARE PARA CLARO COLOMBIA POR SP FLASH TOOL

Esta es la solucion que logre dar para un celular NYX FENIX de Claro Colombia

Queda con Imei original pero con bandas cerradas, solo aplicas el mismo metodo del ZTE V765

LIBERAR ZTE V765 GRATIS SIN PC

Entrar en el menú de ingeniería ##3646633##
En el apartado 'SIMMeLock -> Network Subset Personalization -> Unlock permanently' y finish.
En el apartado 'SIMMeLock -> Service Provider Personalization -> Unlock permanently' y finish.
En el apartado 'SIMMeLock -> Corporate Personalization -> Unlock permanently' y finish.
En el apartado 'SIMMeLock -> SIM Personalization -> Unlock permanently' y finish.

En el apartado 'SIMMeLock El código a introducir es: 12345678 –, aunque dice que codigo erroneo, te devuelves y esta opaco la palabra unlock.

volvemos al menú anterior y nos aparecen activadas todos las opciones que antes no lo estaban y desactivada 'Unlock' que es la que estaba activada, entramos en 'Unlock permanently' y aceptamos.
Apagamos el teléfono y ponemos una SIM de otra compañia distinta a la del terminal, y comprobamos que todo haya salido bien.

La version del SP FLASH TOOL es la v5.1352.01 la cual incluyo, seleccionen todo los archivos incluyendo el PRELOADER

1)Conectar el celular y esperar a que aparezca cargando (se supone que tienes instalavdos los drivers para los MEDIATEK) luego desconectar del PC (dejar el cable conectado al celular) y quitar la bateria.

2) Abrir el SP FLASH TOOL, seleccionar archivo scatter, seleccionar todas la casillas.

3) Dar click en DOWNLOAD, Conectar el cable al PC y seguidamente colocar la bateria al celular

Y listo se hace conexion se llena la barra morada y luego empieza a descargar los archivos mostrando esto con la barra amarilla, en el SP FLASH TOOL,

Esperar que llegue al 100% y saldra un cuadro verde con un OK.

Desconectas, sacas y pones bateria, esperar como 5 minutos o diez,

verificas que no haya cambiado el imei, abres bandas (con el metodo que describi antes) y listo, full 100%

English	Select Show
FIRMWARE FOR CLEAR COLOMBIA BY SP FLASH TOOL This is the solution that I can give for a cell phone NYX FENIX Claro Colombia It remains with original Imei but with closed bands, only apply the same method of the ZTE V765 FREE ZTE V765 FREE PC Enter the engineering menu ## 3646633 ## In the section 'SIMMeLock -> Network Subset Personalization -> Unlock permanently' and finish. In the section 'SIMMeLock -> Service Provider Personalization -> Unlock permanently' and finish. In the section 'SIMMeLock -> Corporate Personalization -> Unlock permanently' and finish. In the section 'SIMMeLock -> SIM Personalization -> Unlock permanently' and finish. In the section 'SIMMeLock The code to enter is: 12345678 -, although it says that wrong code, you return it and this opaque the word unlock. We return to the previous menu and we appear activated all the options that were not previously and 'Unlock' is disabled which is the one that was activated, we enter 'Unlock permanently' and we accept. We turn off the phone and we put a SIM of another company different from the one of the terminal, and we verify that everything went well. The SP FLASH TOOL version is v5.1352.01 which I include, select all the files including the PRELOADER 1) Connect the cell phone and wait for it to load (it is assumed that you have installed the drivers for the MEDIATEK) then disconnect from the PC (leave the cable connected to the cell phone) and remove the battery. 2) Open the SP FLASH TOOL, select scatter file, select all the boxes. 3) Click on DOWNLOAD, Connect the cable to the PC and then place the battery on the cell phone And ready is made connection is filled the purple bar and then begins to download the files showing this with the yellow bar in the SP FLASH TOOL, Wait for it to reach 100% and a green box will appear with an OK. Disconnect, take out and put battery, wait like 5 minutes or ten, Check that you have not changed the imei, open bands (with the method I described before) and ready, full 100%

English

Select Show

FIRMWARE FOR CLEAR COLOMBIA BY SP FLASH TOOL

This is the solution that I can give for a cell phone NYX FENIX Claro Colombia

It remains with original Imei but with closed bands, only apply the same method of the ZTE V765

FREE ZTE V765 FREE PC

Enter the engineering menu ## 3646633 ##
In the section 'SIMMeLock -> Network Subset Personalization -> Unlock permanently' and finish.
In the section 'SIMMeLock -> Service Provider Personalization -> Unlock permanently' and finish.
In the section 'SIMMeLock -> Corporate Personalization -> Unlock permanently' and finish.
In the section 'SIMMeLock -> SIM Personalization -> Unlock permanently' and finish.

In the section 'SIMMeLock The code to enter is: 12345678 -, although it says that wrong code, you return it and this opaque the word unlock.

We return to the previous menu and we appear activated all the options that were not previously and 'Unlock' is disabled which is the one that was activated, we enter 'Unlock permanently' and we accept.
We turn off the phone and we put a SIM of another company different from the one of the terminal, and we verify that everything went well.

The SP FLASH TOOL version is v5.1352.01 which I include, select all the files including the PRELOADER

1) Connect the cell phone and wait for it to load (it is assumed that you have installed the drivers for the MEDIATEK) then disconnect from the PC (leave the cable connected to the cell phone) and remove the battery.

2) Open the SP FLASH TOOL, select scatter file, select all the boxes.

3) Click on DOWNLOAD, Connect the cable to the PC and then place the battery on the cell phone

And ready is made connection is filled the purple bar and then begins to download the files showing this with the yellow bar in the SP FLASH TOOL,

Wait for it to reach 100% and a green box will appear with an OK.

Disconnect, take out and put battery, wait like 5 minutes or ten,

Check that you have not changed the imei, open bands (with the method I described before) and ready, full 100%

※Please make a backup of your device before installing or updating ROM

Responses to “NYX FENIX Claro Solucion para Colombia”

01/08/2017

ArturoR_07 on 05/04/2017 @ 9:06 pm

gracias broht en salvador funciona bien gracias

Log in to reply.
07/31/2015

lowil48 on 05/06/2017 @ 11:58 pm

Excelente amigo, muchas gracias por su aporte!

Log in to reply.
02/10/2016

frbsur1 on 05/09/2017 @ 7:15 pm

Queda con la camara alreves, pero con las bandas abiertas… alguna rom que solucione el problema de la camara?

Log in to reply.
10/10/2014

proyetcel on 05/19/2017 @ 7:48 am

gracias de colombi BUEN APORTE

Log in to reply.
04/04/2016

leonardo121212 on 06/09/2017 @ 4:11 pm

a mi se me cerraron las bandas pero con el crack NCK le abri las bandas otra ves… gracias x el aporte

Log in to reply.
06/24/2017

alejandroyanez22 on 06/24/2017 @ 10:19 pm

Podrias ayudarme la camar me quedo al reves AYUDA ES URGENTE!!!

Log in to reply.
06/20/2017

Djkeymix on 06/27/2017 @ 11:03 pm

me quedo con la camara alreves como lo puedo solucionar ???

Log in to reply.
09/16/2016

omarkardenas23 on 08/28/2017 @ 11:25 pm

no puedo entrar en el menú de ingeniería

Log in to reply.
05/09/2015

eljoropo on 10/17/2017 @ 12:47 am

MENÚ INGENIERO MARCAR *#*#3646633#*#*

Log in to reply.
02/07/2017

polancom on 11/06/2017 @ 1:49 am

A probar, luego les comento,como me fué!

Gracias de antemano

Log in to reply.

DESCRIPTION

Responses to “NYX FENIX Claro Solucion para Colombia”

Leave a Reply ▲

Leave a Reply
▲