- Title: OmniROM
- Listed: October, 2018
- Last modified: 10/18/2018 12:49 pm
- Version: 8.1
You must be logged for ROM download.
12042 total views, 2 today
Member Info
DESCRIPTION
This ROM is not Mine
Goes all Credits to deniel_hk
I am just sharing this ROM
I am not posting for money
its my hobby
Install
Flash with the latest TWRP
1. Factory reset
2. Flash ROM
3. Flash SuperSU (tested ver.2.82) (Mandatory)
4. Reboot and setup wifi
5. Flash Gapps (arm64-8.1-pico)
6. Flash the given kernel for performance (optional)
7.flash lagfix (Optional)
Lagfix
* https://androidfilehost.com/?fid=24736070629327001
Done
Change Log
2018/10/6 – OmniROM 8.1
- The latest OmniROM 8.1 source, Android-8.1.0_r46 (OPM4.171019.030.K1)
- New build enviornment
- Security patch Sep. 5, 2018
Current Status
KERNEL
Patch: Binder and sdcardfs update are required and essential for Oreo.
See commits in my github for detail
AUDIO
Recording: Working
Playback: Working
Patch: Load a copy of the struct instead of the pointer to address.
BLUETOOTH
Working
Issue: Workflow issue in BTIF driver.
Patch: New driver and HAL build from source.
CAMERA
Flash/Torch: Working
Capture: Working
Issue: User handle is required in GetMemory. MTK blobs return null.
Patch: Save a copy of the user handle. Don't know if other devices might work or not. It's better to rebuild a few blobs but I don't have the source for my device…
Issue: Oreo use a ring buffer of native_handles and no more ANativeWindowBuffer.
Patch: A wrapper is required for the libcam.client. (The better way would be rebuild it but again no source…)
HDR: Working with Snap in LOS-15.1
Video recording: Working
Issue: Oreo doesn't support GRALLOC (or I don't know how). The old HAL1 implementation doesn't work too.
In short, need to find a way for the metadata that our old blobs can handled.
Patch:
1. Add libcamera_parameters_mtk for the MTK extra parameters
2. Add another mode to handle Gralloc in stragefright.
3. Patch the OMXNode to handle Gralloc mode.
4. patch the OMXClient to use mediaserver
5. Patch the hardware interface to handle Gralloc Metadata and work with the new OMX interface.
DISPLAY/TOUCH SCREEN
DT2W: Working
FM RADIO
Working
GPS
AGPS: Working
GPS & BEIDOU: Working
GLONASS: Enabled by default
GRAPHIS
HWC: Working
Issue: Android platform changed
Patch: A simple patch in libgui_ext (might use shim if timestamp proved no use)
OpenGL: Working
LED
Notifications: Working
Charging: Working
Low power: Not Working
See Post #806 for detail. Haven't study why –pending
MEDIA
Video Playback: Working
Hardware decoder: Working
Issue: crashed
Patch: A small patch in minijail use Asan.
POWER
Power off charging: Working
RIL
Phone calls: Working
Mobile Data: Working
SMS: Working
Dual SIM: Working
Issue: Completely new approach in Oreo with interface/services. No more sockets. AND all .c libraries are proprietaries.
Patches:
1. Replace the MTK RIL daemon with AOSP patching for MTK
2. Wrap (eventually replaced) the libril from MTK with AOSP patching for MTK
3. Patch the RIL interface/service to work with the MTK vendor library.
Some more detail can be found in post #65 and post #806
SENSORS
All sensors are Working
Patch: Lower the requirement from 1.3 to 1.0
WIFI
ap,p2p: Working
Miracast: Working
Noted: only work on 2.4G as before
Hotspot: Working
Hidden SSID: Not support
No idea why yet. –pending
USSD not working
In order to avoid claims, before installing, we necessarily backup all the sections including the nvram section!
※Please make a backup of your device before installing or updating ROM
how to help you for ussd ?
In my opinion, you just need to support unicode in ussd
VOLTE IS WORKING.
cannot install it it says E;unknown error[log] while flashing and stuck at logo
please help me
Strictly follow the steps
Any bugs in this rom ??? Reply me fast
Trun Android version into 9
Anybody can explain why magisk not work in 8.0 and 8.1