DESCRIPTION

Hola Cool Fans!

Team Innovative presents OPTIMISED STOCK 2.0 for CN3

Now with AROMA INSTALLER and OTA Updater

v2.01 Users, flash the OTA Updater zip given in Downloads Section Below to receive further updates of Optimised Stock automatically through "OTA Updater" App
From the "OTA Updater" App you will receive further updates of Optimised Stock automatically. The app will also install the updates automatically once update packages are downloaded

Aroma Installer Video:

What is AROMA Installer?
AROMA Installer is an Installer from ROMs/MODs which provides a full GUI (Graphic User Interface) along with touch support in Custom Recoveries. AROMA Installer enabled ZIPs have to be flashed the same way as normal ZIPs. Once flashed, the AROMA Installer will start. The main purpose of AROMA Installer is customization according to user's needs. Users can choose which features/apps/mods to install along with the ROM.

How to use AROMA Installer for installing Optimised Stock 2.01:
1. Flash the zip normally from twrp
2. Now aroma installer will begin
3. Be gentle with touch. Touch very lightly. That will give better response and better accuracy. Touch is not that accurate. But still it's good.
4. Select theme for the installer User Interface
5. Agree to the license
6. Read the changelog
7. Select "Install the ROM"
8. Select "default" if you want all the features to be installed. Select "custom" if you manually want to select the features to be installed.
9. Proceed.
10. Select whether you want to wipe cache and dalvik after installation
11. Install now
12. Read the instructions and remember them
13. Reboot your device
14. Follow the instructions given by the installer:
  - update SU binary
  - install busybox binaries from busybox app
  - install V4A drivers
  - reboot

Addons which you can select/deselect in AROMA Installer:
1. Apps:
  - update coolshow
  - Internet speed meter app
  - busybox app
  - trebuchet
  - material design xposed installer
2. Mods
  - ViPER4Android
  - EmojiOne2. 1
  - AD Blocking
  - MM CoolUI8 UI sounds
3. Optimised stock 2.01 Boot Logo/Anim
4. Themes/fonts:
  - Material Cirlce by @rajamt.raj03  
  - Lone by Team Avengers
  - 360OS Theme by Aryan
  - EMUI Gold Theme by Vivek Naudiyal
  - MIUI8 Gold Gradient by Abhay Kashyap
  - Ubuntu Font

UPDATE 2.01 (31/08/2016):

• Support all Rotations (180° rotation support added)
• Made NEW System Transition Animations
• Made NEW Toast Entry and Exit Animations
• Made NEW Keyboard Entry and Exit Animations
• Check this video to see the animations
• Updated CoolShow app to latest version
• Remove some bloat
• Updated AD Blocking files
• Fixed Urdu text showing boxes
• Double Tap Home Button to open Recents (Cannot implement DoubleTapOnHome to sleep feature without sources)
• Replace UI sounds with those of MM CoolUI8
• Fix Copying files to SD Card from PC
• IME selector permanently disabled
• Pre-include following Themes:
  Material Cirlce by @rajamt.raj03  
  Lone by Team Avengers
  360OS Theme by Aryan
  EMUI Gold Theme by Vivek Naudiyal
• Ubuntu Font pre-included
• New BootAnimation for version 2.01

Features:

Base ROM: V024- LOLLIPOP BASED

Will work on Black as well as White variants

Pre-Rooted

Bravia+X-Reality+Vivid Engines Installed

ViPER4Android with special Effect Profile for Coolpad Earphones

Busybox installed as user app (Need to open it and manually install Busybox to enable init.d scripts)

Init.d support (see /sdcard/init.d_test.txt if it works)

Init.d scripts pre-installed SPECIALLY MADE for Coolpad Note 3

Battery tweaks at every boot

VM & Cache tweaks at every boot

Build.prop tweaks for battery saving, gaming & performance

FULLY AD-BLOCKED (updated on: 23/06/2016)

NEW Boot Logo & Boot Animation (specially made for this ROM)

ZipAlign all apps (system & user) at every boot

SQLite Optimisations for databases at every boot

Set highest priority for necessary apps (phone, keyboard, launcher, camera, etc)

Bloatware removed

Battery calibration script at boot (if you want to calibrate battery, charge it to 100% and reboot. Check

calibration report in /data/init.d.log)

Interactive Governor tweaks for power saving without affecting Performance

Minimal cpu & battery usage in screen-off state. THIS HAS BEEN PROVED TO REDUCE BATTERY

USAGE IN SCREEN OFF and ON STATE. I observed only 2% battery drain overnight!

    In screen on state:

        Interactive governor will be applied at optimised automatically every time

        Will switch to high frequency only when necessary

        Our CN3 has 8 cores so this won't affect performance but will save battery

    In screen off state:

        Powersave governor will be applied

            CPU0-3 will be set to 442MHz MAX Freq.

            CPU4-7 will be set to 299MHz MAX Freq.

            This much speed is more than enough for smooothly playing music with ViPER4Android effects

and other tasks in background

See Screenstate scaling log at /data/governorscaling.log

All init.d logging done at /data/init.d.log

System hibernation tweak in build.prop

MTKLogger won't start at boot

Increased touch senisitivity without enabling Glove Mode

Internet Speed Tweaks

Memory Tweaks

SELinux set to Permissive permanently

Disabled journalism & Logging

EXT4 FIlesystem Tweaks

Sysctl tweaks

Battery Saving + Performance tweaks both at the same time

Set CFQ as default I/O Scheduler

CFQ I/O Scheduler Tweaks

Increased storage operations speed (Read Ahead value set to 2048KB)

Dalvik Tweaks

Kernel Tweaks

Default DPI=260

Special linux-based "laptop_mode" pre-enabled for battery saving

Default system-wide emoji pack: EmojiOne 2.1

Material Design Xposed Installer by dvdandroid@xda as user app

Trebuchet (CyanogenMod 13) Launcher as system app (Default Launcher also available)

IPV4 & IPV6 Tweaks

Pre-added JIO 4G APN

Some Notes:

1. Whole init.d log available at /data/init.d.log

2. Screenstate scaling log at /data/governorscaling.log

3. To enable developer options, tap on ROM Name 6 times

4. Xposed working and tested. Open xposed installer (will be installed by this zip) > Settings > Enable

"Disabled Resource Hooks" > Come back > select "xposed-v86-sdk22-arm64.zip" and click

Install/Update.

5. In case you want the stock boot logo and bootanim back: http://www.coolpadforums.com/forum.php?mod=viewthread&tid=6342 Download Stock Boot Logo and/or Stock BootAnim from the link
6. NEED TO INSTALL BUSYBOX MANUALLY (from included app) TO ENABLE INIT.D SCRIPTS
 

Post your feature requests for the upcoming update v2.02 here: http://www.coolpadforums.com/forum.php?mod=viewthread&tid=9714

Installation:
1. Download zip
2. Reboot to TWRP Recovery
3. Install zip
4. Install Update 2.01 ZIP
5. Open Busybox app, Grant SuperSU permissions and click on "Install"
6. Open ViPER4Android and click on Yes.
7. Reboot
8. Enjoy!!

THIS CAN BE FLASHED OVER MM AND EVERYTHING WILL BE WORKING FINE INCLUDING CAMERA, FINGERPRINT, ETC

THIS CAN BE FLASHED OVER MM AND EVERYTHING WILL BE WORKING FINE

Team Innovative Members:

1. Amit Kumar Singh  

2. Aryan

3. Sjain  

4. Me

Note:DO NOT COPY MY WORK ANYWHERE ELSE. DO NOT POST LINKS DIRECTLY. GIVE PROPER CREDITS TO TEAM INNOVATIVE AND COOLPAD FORUMS

※Please make a backup of your device before installing or updating ROM