- Title: P8000_Android 6.0
- Listed: July, 2016
- Last modified: 07/12/2016 5:32 pm
- Version: 20160711
You must be logged for ROM download.
119339 total views, 8 today
11 Total favorites
DESCRIPTION
FLASHTOOL VERSION, Info Here: http://bbs.elephone.hk/thread-1037-1-1.html#.VyMZm_mECgp
Known bug:
fingerprint doesn't work.
Attention:
Pls follow the instruction shown on the snapshot, choose the "Firmware Upgrade" option to flash rom.
PAY ATTENTION, Seems to be a RISK of IMEI's loosing after flash.. Do a backup with TWRP for Android 5.1 of NVRAM and/or Mobileuncle 64 and use TWRP for Android 6 to restore imei's
1. Flash Android 6
2. Root your phone (http://forum.xda-developers.com/showpost.php?p=67726031&postcount=56 )
3. install android terminal and type: SU (press enter and grant root permissions)
4. Write this: echo 'AT+EGMR=1,10,"IMEI2"' >/dev/radio/pttcymd1 AND PRESS ENTER
5. Write this: echo 'AT+EGMR=1,7,"IMEI1"' >/dev/radio/pttcymd1 AND PRESS ENTER
6. TURN AIRPLAINE MODE OF, WAIT 10 SEC, TURN ON.
7. ENJOY!
OR TRY to dial in the dialer *#4634# , write imei's in the boxes and confirm.
@Thanks Boka18 and jemmini from XDA:
※Please make a backup of your device before installing or updating ROM


Member Info
the wifi is turned on and off all the time
RECUPERAÇÃO DE IMEIS ELEPHONE P8000
Para quem está passando pelo drama de perder o Imei, eu achei um vídeo quevai funcionar.
Observação prestem atenção no vídeo nos minimos detalhes, para que não haja erro, ele ensina fazer a alteração no modo engenharia, faça exatamente como ele ensinou, observe atentamente um comentario que ele faz com 2:04 do vídeo,pois é muito importante para o sucesso da correção.
O link para o vídeo https://www.youtube.com/watch?.....v=E1Wa0qx9OWk , para entrar no modo engenharia *#*#3646633#*#*
Nicely done the upgrade was superb. I really like the newer version of android 6.0 Thank you so much.
I think its not meant for v1 of the P8000: Besides the fingerprint sensor driver (it contains the driver for the onw in the updated version of the P8000 only), it seems to become unstable over longer running time. It becomes unresponive with high delay even for the on/off button (needs reboot)
Hi,
first, i have no Problems with WIFI in this Android 6 Version.
But I have the problem with IMEI.
I tried already +#+#3646633#+#+ –> But there is no CDS in Conectivity.
So I tried your solution: TWRP and root was very easy, but …..
"Write this: echo 'AT+EGMR=1,10,"IMEI2"' >/dev/radio/pttcymd1 AND PRESS ENTER"
"Write this: echo 'AT+EGMR=1,7,"IMEI1"' >/dev/radio/pttcymd1 AND PRESS ENTER"
Does not work
Also this one doesnt work too –>"dial in the dialer *#4634# , write imei's in the boxes and confirm."
There is no Box for me.
Last thing I have tried is to put them into Phone with MTK Droid Tools. But there is no Phone connected … weired..
Now I am back on 5.1 until anybody knows a solution.
I had same issue.
Follow below steps:
Maui META 3G Tool (CDC drivers Required) (https://www.needrom.com/downlo.....ver-7-1444-0-0/). Also install MTK VCOM USB Drivers (http://forum.xda-developers.co.....rivers-t3264884).
1. Install "Maui META 3G Tool" on your PC
2. Open it.
3. Click "Options". Connect Smart phone into META mode"
4. Click on Reconnect button
5. Switch off your phone
6. Connect via USB Cable. It tske time to connect your phone with Maui Meta. So wait..
7. Change "Get Version" to "IMEI Download"
8. Click "Change NVRAM Database file"
9. Give file path. (File included in ROM with name "BPLGUInfoCustomAppSrcP_MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V79_P7_1_lwg_n".
10. Select "BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_ MD_WG_MP_V5_1_wg_n"
11. Type both IMEI numbers
12. Click "Download to flash"
13. Click "Upload from flash"
14. Close the IMEI Download Tab
15. Disconnect
16. Switch on the phone.
Not bad but I prefer 5.1
good rom thank you very much
Very good Rom. Thanks a lot.
@nenito_enrique
yes, tried * # * #3646633 # * # *
No CDS.
copied the MP0B_001 from 5.1 with IMEI to 6.0
Now it works
I have elephone P8000 6.0 USA with android 6.0 and have tried with all the programs of rootear and could not have had if anybody has the same problem or has the solution
To root your device, download flash tools (http://spflashtools.com/window.....sh-tool-v5-1636).
Install TWRP only (Recovery.img) (https://www.needrom.com/downlo.....-0-0-ele-p8000/)
Copy supersu in phone memory (https://download.chainfire.eu/.....921/SuperSU)
start phone in recovery mode (switch off phone, hold volume up button and power botton simultaneously. If robot image with red sign appear, hold power power button and press volume button once.)
Install supersu and reboot.
Phone is rooted now