DESCRIPTION

ROM Tablet PIPO W12 - ROM Windows 10

ONLY SDM850

ROM Official PIPO W12 version: JS-JX-12.3-S116QR110-QA67B-161-C

Language support: Multilang

Install ROM:

W12 flashing instructions

1. Prepare a 16GB disk. Prepare a Type-C interface adapter cable.
2. The format of the USB flash drive is set to FAT32, and the volume name of the USB flash drive is: WINPE
3. Download and decompress the system files, and put the decompressed system files directly under the root of the U disk.
4. Turn off the tablet, connect the USB flash drive with Type-C and then connect to the machine, and then turn on the machine, the machine will automatically read the USB flash drive system.
Note: After the U disk is imported into the machine, the machine will restart with a black screen. Unplug the U disk immediately after the black screen, so as not to read the U disk again after the machine restarts and re-flash the machine.
5. After the flashing is completed, enter the test mode system, click the middle dialog box, and select "OK" in the dialog box. The machine will automatically restart to enter the boot wizard and enter the user mode.

※Please make a backup of your device before installing or updating ROM