• Title: Prestigio MultiPad PMT3011 Wize 3G
  • Listed: 12/20/2017 10:29 pm
  • ROM Version: 1.0.03
  • You must be logged for ROM download.


Overall Rating : 0


692 total views, 1 today

  

Prestigio MultiPad PMT3011 Wize 3G

Author adMember Info


DESCRIPTION



1.    Start the Flash_Tool (Tools folder) application, select the DA_SWSEC.bin file as Download Agent. (this file is located in the directory of upgrade tool)


2.    Click the Scatter-loading (Firmware folder) button, Select the corresponding scatter file. The scatter file is located at the corresponding software’s directory.


3.    After select the file, there will be the following interface.


4.    Change the selection “Download Only” to “Firmware Upgrade


5.    Click “Download” button.


6.    Make sure the device is powered off than connect the device to PC through USB cable.


7.    The device will recognized as MT65xx Preloader.


8.    Run Install.bat file from Drivers directory. When the drivers are installed disconnect and connect again the device to PC.


9.    The device will be recognized as MediaTek Preloader USB VCOM and upgrading procedure will started automatically.

 



※Please make a backup of your device before installing or updating ROM


One Response to“Prestigio MultiPad PMT3011 Wize 3G”







  1. 01/23/2018

    United Kingdom

    Is it compatible with Prestigio MultiPad PMT3037 Wize 3G?


Leave a Reply

You must be logged in to post a comment.