• Title: Remote Control for helping with bricks
  • Listed: 06/22/2014 6:49 pm
  • ROM Version:Any
  • You must be logged for ROM download.

Overall Rating : 14

8623 total views, 1 today

1 Total favorites


Author adMember Info



Hi i support by remote control fro helping people with bricks on MediaTecks devices…

By Remote access i will control your computer and will try to help you

Send my a PM for establishing connection

Donate with PayPal to werty100

Share Button

※Please make a backup of your device before installing or updating ROM

6 Responses to“Remote Control for helping with bricks”

  1. 02/21/2014
    Posts: 1

    hi bro

    my sackam2013@yahoo.com


    give mi u r yahoo id

  2. 07/23/2014
    Posts: 8

    Hi there,

    I got a fake S5 with the chip MTK6572, before to "lost"the mobile, the system or even "AnTuTu Benchamark"detected 3GB Ram and 16Gb storage. well this is not subject.

    After rooting the phone, I wanted to install a CWM, I used the ROM Manager application and another app to do the same. I could installed CWM and the TRW. I tried to reboot the phone and any worked. But nothing happend..

    Some minutes later using the phone as usual, the mobile shutdowned, since this moment I cannot start it again.

    The only thing that I can do is, to start the "recovery mode", Whenever I use the button combination vol up + power + home, it just opens normally;

    Select boot mode:

    [VOLUME_UP to select. VOLUME_DOWN is OK.]

    [recovery mode]

    [fastboot mode]

    [normal mode]

    The ADB doesn't work, I tried with Win and Linux, the prompt never find the phone, even if the OS knows that there is something in the USB.

    I also tried other tools through the computer, but no chance.

    Any recommendation/suggestion?

    Thanks in advance

  3. 07/23/2014
    Posts: 8

    FYI, I have recovered the phone ;-)

    After too many tries, the phone entered in fastboot mode

    1. Pull out battery and put back in

    2. By holding (Volumen_UP) + (POWER)

    3. Plug USB cable into PC

    4. I selected: fastboot mode  –>before it didnt work this option

    5. Phone shows "FASTBOOT MODE"

    6. With USB connection still plugged into PC,fastboot reboot-bootloader

    7. After rebooting, fastboot continue

    The phone started with the default bootloader and finally OS run ;-)


  4. 04/06/2014
    Posts: 4


    I still haven’t fixed my phone yet!? Can you please help me? There is no physical damage….but I lost my data…Its deactivated. I have GT-I9502

    IMG going to try to install one of the ROMs for my phone

  5. 12/10/2015
    Posts: 3

    I need tool for unbrick spreadtrum..

    can you help me…thanks

  6. 12/12/2016
    Posts: 1

    Sir ,

    my motorola moto e 1st gen dead after update from 4.4.2 (downgrade from lollipop to kit kat 4.4.2 and again updated) it is turned off . not chargong and it is showing only qualcomm HS-USB QDLoader 9008 in device manager when connect to a computer. Hence requesting you to advice any solution come out from this issue.

    Thanking you


Leave a Reply

You must be logged in to post a comment.