• Title: rom custom madOS
  • Listed: 01/03/2018 2:14 pm
  • ROM Version: android 8.0
  • You must be logged for ROM download.

Overall Rating : 3

2544 total views, 1 today

1 Total favorites


rom custom madOS

Author adMember Info


This is a Official Build of madOS ( based on AOSP Oreo ) for Oukitel K6000 Plus with MTK 6750 SoC

madOS is based on pure A.O.S.P. with many additional customizations and MediaTek support.


Installation Instructions:

Download ROM from M.A.D. Facebook

Download OpenGapps nano or pico from OpenGapps 
(choose Arm64 and Android 8.0 )


Unlock Bootloader Bootloader unlock

Flash new mandatory new Oreo TWRP (available on downloads)

Boot to the new TWRP recovery

full Wipes (dont come crying if you didn't .. ;p )

Install rom (optionally following by GAPPS if you use them)

Optional: go to: wipe –> Advanced Wipe, tick 'cache' and klick 'repair or change File System' –> change File System –> F2FS –> swipe to the right (hit back several times, and proceed the same way with 'data').

Reboot System


ROM OS Version: 8.x Oreo

ROM Kernel: Linux 3.x

ROM Firmware Required: bootloader unlocked, twrp

Based On: AOSP

Version Information

Status: Stable

Current Stable Version: 1

Stable Release Date: 2017-11-19

Created 2017-11-19

Last Updated 2017-12-31


How-To unlock Bootloader and install TWRP

ATTENTION: This is voiding your warrenty

Install minimal adb and fastboo to your PCt: Minimal ADB and Fastboot

On the smartphone: Go to Settings –> About Phone and hit 'build Number' seven times, to enable 'Developer Options'

Go to Settings –> Developer Options, and allow usb-debugging and allow OEM-unlocking (For bootloader unlock)

Connect the smartphone to the pc. On the smartphone accepts the adb connection with the pc

Start 'Minimal adb and Fastboot' at Pc. In the command window, type: "adb reboot bootloader" and press Enter (this is restarting the smartphone into the bootloader)

WARNING: This step deletes all data from the smartphone, returns it to the factory setting and leads to the loss of the warranty! In the command window, type "fastboot oem unlock" and press Enter (to unlock the bootloader). You probably need to press some button of the phone to confirm (check the display for this)

Download the Twrp image: Oukitel K6000 Plus TWRP, and copy the recovery.img file to the installation folder of 'minimal adb and fastboot'

In the command window, type "fastboot flash recovery recovery-twrp31jemini.img" and press Enter. After successful flash, enter "fastboot reboot" in the command window, press 'Enter'. Then immediately press and hold 'volume up key' on the smartphone (Until a small menu appears)

3 options appear on the smartphone: Recovery, Fastboot, Normal. You can navigate with 'volume up key' and confirm your selection with 'volume down'. Navigate to Recovery and press the volume down key to confirm (Smartphone starts now the Installed TWRP Recovery)


※Please make a backup of your device before installing or updating ROM

10 Responses to“rom custom madOS”

  1. 10/24/2014



    Works well on my phone! 

    nice job

  2. 10/29/2014



  3. 08/09/2017


    Very good job! Rooted with Magisk v15.3: the modules greenify4 magisk and ExSDCard Access Enabler working fine! Xposed 90.0-beta1 works also.
    Greenify helps save battery-power! Viper4: no problem! Camera FV-5:absolut o.k.! Nandroid backup:problems,… Titanium Backup: o.k.!

  4. 08/09/2017


    Update: the bluetooth functions in madOs 8.0 are very bad: pairing not stable and no function in my car, very often lost connections with other devices: i hope of elemination of these bugs in perhaps 8.1? !!! Thanks!


  5. 03/15/2018


    Hi I want to install your custom rom, but there's a problem. I've read that to install your rom I must unlock bootloader and to do that I must allow usb debug, but my phone stucks on Oukitel start screen. How can I make Android working again and allow usb debug???

  6. runcanilie79



    Skipping Digest check: no Digest file found

    Warning: No file_contexts failed to parse int in

    Updater process ended with ERROR: 7

    • 12/07/2014


      I had the same issue.

      You must unzip the rom. Go to madOSxxx\META-INF\com\google\android\updater-script.

      Open with notepad updater-script.

      Remove this section 

      (!less_than_int(1511120282, getprop("ro.build.date.utc"))) || abort("E3003: Can't install this package (So 19. Nov 20:38:02 CET 2017) over newer build (" + getprop("ro.build.date") + ").");
      getprop("ro.product.device") == "k6000_plus" || abort("E3004: This package is for \"k6000_plus\" devices; this is a \"" + getprop("ro.product.device") + "\".");

      First line must be look like this

      ui_print("Target: Oukitel/full_k6000_plus……

      Make a new zip with tree : META-INF, boot.img, file_contexts.bin, system.new.dat, system.patch.dat, system.transfer.list – this must be main catalog without any folders extra.

      Then flash with twrp.

      At first boot my phone stuck at logo madOs, but after restart (hold power for 10 sec) is started normally.

      I checked myself this method.

  7. 10/29/2014



    I am only a file sharer, I have not yet install this rom on my tel

  8. 12/24/2015


    This doesnt work well for me google ceeps crashing and i dont have root. I dont have google play store so i downloaded aptoide wich is not ideal

    maps also doesnt work. Any sujestions?


  9. 12/07/2014

    Everything works, except option for disabling sim cards.

    For bluetooth connection: choose  do not to optimize in option Batterty optimalization

    I used open_gapps-arm64-8.0-pico-20170909-UNOFFICIAL.zip because are smallest about 70 mb.

    Important: errors that someone mentioned above

    Install rom, gaps, and magisk at the sime time during update in twrp (add more zip – optionin twrp ).

    Only in that way all will works ok.




Leave a Reply

You must be logged in to post a comment.