DESCRIPTION

Pre-Requirements

• Take a proper backup of all your existing data and settings before proceeding to the ROM installation guide using a recommended custom recovery like TWRP.
• Download and install the correct USB Drivers for the Galaxy Tab 2 on the PC.
• Enable USB Debugging Mode on your device by navigating to Settings > Developer Options.
• Your device should be rooted with TWRP recovery installed on it.
• Make sure that the battery level of your device should be charged at least about 80%
•  

• First Time Installing or Caming From another Rom
  

  - Make sure you're running a proper working Recovery (TWRP)
  - Copy A-GAPPS 6.0.1_2.zip and crdroid-6.0.1-20160404-p3100.zip to your internal SDCard or tablet
  - Boot into Recovery
  - Wipe system,dalvik,data and cache
  - Install crdroid-6.0.1-20160404-p3100.zip
  - Install A-GAPPS 6.0.1_2.zip (tk or slim recommended)
  - DO A DATA WIPE / FACTORY RESET – Reboot
•  
•  

  Steps to Flash with CRDroid Custom Rom
  

  1:- First, download crdroid-6.0.1-20160404-p3100.zip for Galaxy Tab 2 7.0 P3110 on the desktop of the PC from the above link.

  2:- Connect the Galaxy Tab 2 7.0 P3110 to the PC using its USB data cable and mount its USB memory storage.

  3:- Transfer the crdroid-6.0.1-20160404-p3100.zip & A-GAPPS 6.0.1_2.zip File file that you’ve already downloaded from the above link, to the root folder of your SD card on the phone.

  4:- Disconnect the tablet from the PC and turn it OFF to boot it into Recovery Mode.

  5:- Turn ON your tablet while pressing and holding Volume Down + Power buttons at the same time to enter into Recovery Mode.

  6:- While your device is now in TWRP Recovery, perform wipe data/factory reset, wipe cache partition and wipe dalvik cache also by navigating to Advanced > Wipe Dalvik Cache.

  7:- Go back to the main Recovery Menu and choose install zip from SD card→ choose zip from sdcard.

  8:- Navigate to the crdroid-6.0.1-20160404-p3100.zip file which you’ve already transferred to the SD card of your device. Select the ROM .zip file and confirm the installation to begin.

  9:-once the installation is completed install also A-GAPPS 6.0.1_2.zip. From Recovery Menu, reboot your device by selecting reboot system now.

  Your Galaxy Tab 2 7.0 will be rebooted and may take about 4 to 5 minutes to boot for the first time after installation.

  Done! You’ve successfully updated Galaxy Tab 2 7.0 to crDroid Android 6.0.1 custom ROM.

   

  ROM by crdroid.net

   

   

※Please make a backup of your device before installing or updating ROM