• Title: STAR N9589
  • Listed: 10/02/2013 1:53 pm
  • ROM Version: ROM Android 4.2.1
  • You must be logged for ROM download.

Overall Rating : 19

14772 total views, 2 today

1 Total favorites


STAR N9589
STAR N9589 - Image 1STAR N9589 - Image 2STAR N9589 - Image 3STAR N9589 - Image 4STAR N9589 - Image 5STAR N9589 - Image 6STAR N9589 - Image 7STAR N9589 - Image 8STAR N9589 - Image 9STAR N9589 - Image 10

Author adMember Info


Official ROM Star N9589 Version  20130715_e2001v21_v89_gq2008s

Warning! This ROM is for the hardware configuration:

Camera Main: ov8825_mipi_raw Sub: ov3660_yuv Lcm: LMO57APKP02A TouchPanel: FT5406

To test your configuration, run the factory mode. (Turn on the phone while holding the volume down) Select Version and scroll down (volume down).

If your configuration is different, the firmware is possible with a brick. Be careful.

ROM Install :

Unpacked driver installation and install.
To unpack SP_Flash_Tool_exe_v3.1316.0.150.zip run Flash_tool.exe
Select a the in scatter_emmc.txt in ROM
Click Flash_tool.exe interface Firmware-> Upgrade

Phone after taking the battery in put something
Connect the data cable
Brush finished with green circles appears

※Please make a backup of your device before installing or updating ROM

40 Responses to“STAR N9589”

  1. 08/25/2013


    Hello i have strange touch screen problem after unbricking my N9589T phone


    do you know how i can fix my phone.

  2. 08/25/2013


    Okay, thanks aniway.

  3. 07/25/2013


    not working for me :( brick my phone 2 times … tried all patches and same result . 

    • 06/05/2013


      but have you checked your apparatus configuration before flashing? if you give me the data, then try to make a patch for your phone.

  4. 06/10/2013


    which is the changelog of this rom?

  5. 08/29/2013


    can i flash this rom on my star s7589?will it work?

  6. 06/10/2013


    mass, is this a stock rom?

    which are the feature?






    Tested this ROM on some of the N9589 I have here and with any of the lk.bin versions, the phone will not start – I have to re-flash it with 20130527 version in order to get them to work again.

    Here is the info from "Factory mode"

    BB Chip: MT6589
    MS Board: 01v21_v89_gq2008s
    SW Ver. ALPS. JB2.MP.V1.2
    Custom Build Verno. 1369628510
    LcmCam Info:
    Camera Main: ov8825_mipi_raw
    Sub: ov3660_yuv
    LCM: RX_5720TM_501A
    Touch: FT5406

    Any good tips how to get the ROM to work?

    Best regrads :)

  8. 06/05/2013


    download 20130715_e2001v21_v89_gq2008s  and unpack. replace lk.bin from lk.bin ov8825_mipi_raw_ov3660_yuv_RX_572OTM_501A




      Dear Masslakoff,

      I tried that, but still the same result, black screen. Only way to bring the phones back to life is to use the older FW.

      If you should have any tips on how to wake them up with your or a newer ROM, I would much gratefull!

      Have a nice evening!

      Best regards :)

  9. 06/11/2013



    Won't work on mine either, thank you for your time!

    Factory Mode info:

    BB Chip : MT6589

    MS Board: v89_gq2008s

    SW Ver. : ALPS. JB2. MP. V1.2

    Lcmcam info:

    Camera Main : ov8825_mipi_raw

    Sub : gc2035_yuv

    LCM : Z57002N50C20

    Touch : FT5406


    Thanks man!

  10. 07/10/2013


    I need this ov8825_mipi_raw, gc2035_yuv, RX_572OTM_501A


Leave a Reply

You must be logged in to post a comment.