- Title: STAR / ULEFONE / HDC U9592 20140318 OFFICIAL UPDATE VIA CWM
- Listed: September, 2014
- Last modified: 09/13/2014 2:15 pm
- Version: BUILD 20140318 4.2.2
You must be logged for ROM download.
17774 total views, 1 today
1 Total favorites
OFFICIAL
Member Info
DESCRIPTION
This is the latest update for you Ulefon U9592 2gb 16gb mt6592 octacore version
Will fix:
Lockscreen security bug
"whatsapp quality" debug
It will install over your existing rom
Istructions are on destination page (second link).
Click on the link, wait 5 seconds and then on continue.
※Please make a backup of your device before installing or updating ROM
Nice, but i need da CWM file to replace the original Recovery ?!?!?
Hi, just put the recovery
Hello Roma and install this cell does not start stays in the logo android..ayuda
SALVE O INSTALLATO LA ROM COME DA GUIDA MA RIMANE FISSO SUL LOGO DI ACCENSIONE ,MENTRE O PROVATO LA ROM MIUI TUTTO BENE SOLTANDO NON CE LA LINGUA ITALIANA.
How to solve boot = replace the boot.img of this rom with boot.img of miui
and it will work.
Thank, alickaj.
@ rin 22 per far andare queto update basta sostituire il file boot di questo update con quello della rom Miui. Altra buona notizia è che installando i due file contenuti in boot_recovery_u9592 allegati sopra parte correttamente la modalità di recovery. Quindi ricapitolando a beneficio degli italiani: 1) aprire flashtools 2) selezionare lo scatter della rom originale 2) sostituire i file boot e recovery con quelli contenuti in boot_recovery_u9592 3) premere download 4) togliere la batteria dallo smartphone 5) senza batteria, collegare lo smartphone al portatile 6) attendere che l'operazione di flash termini 7) caricare in una sd card il file update zippato avendo avuto cura di fare la sotituzione di boot indicata in alto 9)inserire l'sd card nel telefono 10)riavviare il telefono, tenendo premuti il tasto vol+ e power in modo da entrare in modalità recovery 9) selezionare install zip from sdcard 11) selezionare choose zip from sd card 12) selezionare il file Update_U9592 13) confermare la selezione 14) attendere il completamento dell'operazione di flash e riavviare.
Tip:
If you don't have 20140114 as original stock ROM, you can't just replace your boot.img or recovery.img with this recovery.img(CWM), because it can be at different memory addresses.
I have another question.
I tried to update to 20140318 with the firmware version from the ule-fone website, but now missing my EMEI numbers.(can't update because AT command send failed) and also Unknown Baseband) My original stock ROM was 20140116 version.
I don't have CWM, but when I boot with volume+ and power I see a recovery menu(orange letters(not blue as CWM) and option for 'Install zip fromSDcard'.
Can I use your firmware version to update this way without first putting CWM recovery img, but using this recovery version that came with the 20140318 version from the ule-fone website?
Sorry, I was wrong with my first sentence. If you use the right scatter file(the one of the firmware version in you phone), than you can do this.
Used with 20140114 as original stock ROM for repaired problem. And up with 2706_v92_gq3009fw_140114__boot_patched_140423-193045.zip and 2706_v92_gq3009fw_140114__recovery_140423-193045.zip .
After that reboot with recovery mode and choose with install from zip that Update_U9592_20140318.zip.
After reboot you will up with 2706_v92_gq3009fw_140114__boot_patched_140423-193045.zip and 2706_v92_gq3009fw_140114__recovery_140423-193045.zip again.
It will be pass all.
But now I have meet the new problem that the rotation sensor does not work…..!!! Can who help me?
In my recovery I haven't update from zip file….
always the same problem, never a linear update
Umbi59
con file di boot intendi uboot o bootimg?
Saluti e grazie
Dave
boot.img
Done with Umbi59 instructions… loop image in boot !
WTF!!!
Dave