- Title: Star/Kingelon G9000 KitKat 4.4.2 porting for s5ke1mipi_raw equipped phones.
- Listed: April, 2015
- Last modified: 04/12/2015 2:06 pm
- Version: 24/10/2014
You must be logged for ROM download.
22099 total views, 3 today
7 Total favorites
Member Info
DESCRIPTION
This rom is a porting of the last stock firmware with libs and drivers for the infamous and rare s5ke1mipi_raw back camera. Included also three type of display drivers.
Everything should work fine, at least it does on my terminals equipped with the old 4.2.2.
Included there are empty DATA and CACHE files.
The rom is for the 8GB/FULLHD/2GB version, it should work on 16GB phones as well.
Please check your LCD driver before flashing: go into factory mode (VOL- and POWER) and check which kind of LCD driver you have installed.
BACKUP YOUR IMEI WITH MTKDROIDTOOLS BEFORE FLASHING!
If your phone has colored stripes or doesn't show anything, change the LCD driver with SP MULTIPORT TOOL!
INSTRUCTIONS:
- Unpack the rom
- Turn off your phone and remove the battery
- Load the scatter file in SP FLASH TOOL, it should autoselect "Download"
- Press "Download" and connect your phone
- Wait for the green sign
- Disconnect your phone
I strongly recommend to boot in recovery (VOL+ and POWER) and perform WIPE DATA/FACTORY RESET after the rom has been flashed.
NOTE: if you want to keep your data, select MOTA SIU LIKE instead of DOWNLOAD in SPFT.
Please donate if you find my work useful!
Happy flashing!
- kingpinzero @ XDA / adroidiani
※Please make a backup of your device before installing or updating ROM
Guys if you find my work useful please think about donate a b**r, thanks
Ciao, ho un problema. Quando usi due sim, se vai in una zona non coperta da segnale, quando ritorni sotto piena copertura le sim non tornano a prendere. In pratica devi spegnere e riaccendere la seconda sim (se lo fai con la prima ci mette un' infinità…)
Thanks kingpinzero
Congratulation great work evry thing works
My back camera wont work, can you tell me how i fix this?
ciao ho fatto il flash ma la memoria mi segna 2,73 gb, prima 10gb, consigli?
Hi, is it for MT6592? Can you include HLY_546HX_959C lcm driver in lk.bin and circulate? thanks