- Title: Flashtools MT65xx
- Listed: June, 2014
- Last modified: 06/08/2014 2:04 am
- Version: N/A
You must be logged for ROM download.
250292 total views, 3 today
69 Total favorites
Member Info
DESCRIPTION
Make sure that you read everything carefully and know what you are doing. Don't blame me for any damage that may occur on your phone.
SP Flash Tool is backward compatible, which means you can (and should) use the most up to date version.
What's needed:
- USB data cable
- MediaTek USB VCOM drivers
- SP Flash Tool (v3.1206.01 or higher for MT6575 / v3.1222.00 or higher for MT6577)
- The Right ROM File from your phone vendor
The tutorial:
- First install SP_Drivers_vx.xxxx.rar for Android
- After, make sure that you have MediaTek DA USB VCOM drivers installed.
- Then in order to flash when you plug in your phone to PC in power off state….you
see a message on your PC, Looking for Drivers “MediaTek MT65xx Preloader”
- Just go to device manager when you see that message….say install drivers manually
and give path to usb2ser_Win7.inf (or other OS) to install the driver.
Flashing the whole ROM
First of all open
SP Flash Tool, then click Scatter-loading button to load the correct scatter
file (MT6575_Android_scatter_emmc.txt or MT6577_Android_scatter_emmc.txt, depending on
which phone you have) for your device and ignore any message that may appear.
Turn off your phone, remove the battery and replace it after some seconds (and don't turn on the phone).
No need for any Fastboot mode, just plug in your phone to PC with USB cable in powered off state for next step
Press F9 (or hit Download button) and connect your phone into the computer via USB data cable. The process will start and a red progress bar will appear.
(You might actually see “Looking for MediaTek MT65xx Preloader” drivers at this step as well…just follow the same step as before to install the VCOM drivers and the flashing process will start)
After the red progress bar is complete, there will appear a purple progress bar.
Right after the purple progress bar is complete, a message will appear underneath it: “
Please insert USB cable in x seconds” and then the download will start right away (you will see the yellow progress bar filling up).
When the yellow bar is complete, you'll get a popup with a green circle and
Download OK message, which means that the process has been successfully terminated.
You can now safely disconnect your phone and turn it on. The process ends here.
Flashing only part with Recovery.img
- In case you want to flash just one part of the ROM, that is also possible. In the shown example, only recovery image will be flashed. Deselect all parts except the one(s) you want to flash and then press F9 (or hit Download button
- The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Note that, even though it isn't mandatory to select it on the list of images to flash, preloader file must be present in the same folder as the other partition(s) that you want to flash, or else phone will not be able to enter into download mode.
Attention: Please follow the instructions carefully. I
will not take any responsibility on whatever may
happen with your phone.
※Please make a backup of your device before installing or updating ROM
Hi guys I have a Lemon Android Model P103 Build Prop. IMM76D ICS 4.0.4 MT6577 5" screen stucked on boot logo animation. Showing BROM Error S_STORAGE_NOT_MATCH (3167) when flashing with Flashtool_20140812(v5.1428.05.000). does anyone have a rom or some sort of backup file I can use to restore this phone?
Please email amriksingh19july@gmail.com. if you have any solutions or suggestions I've pretty much tried everything. I will be highly thankful to you.
Regards
Amrik Singh
OMG!! It worked!!
Ok, read this: I have a Doogee DG310 Voyager 2 and I love the thing. But during the last update from Doogee, I had my phone rooted, all of a sudden I see a "dead"Android with a red triangle floating above his opened body!!
I immediatly thought OhOh, This Is Not Good..
So I tried to start up in recovery, what worked, but I did not read good, so I thought that vol. up and down buttons was to navigate. I was wrong, the vol. down button was to navigate and the up button was to select, so I accidentally selected the complete wipe of, well, EVERYTHING!!
So I searched the internet, came on this page, joined up, and started fiddling around wth spflashtools. Becouse I had absolutely nothing no more, I dont know how I did it exactly, but with the help of this page and a bit of, well, screwing around by myself, all of a sudden I saw the red progress bar, then the purple and finally the yellow.
I started my phone up and it stayed on the start (Doogee) screen, but after removing battery and putting it back, it went on with the start up!!
I hope it makes a bit sense, my story, but it comes down to this: TNX!!!!!!!
:0
if you are an avarage person, don't even try.
need scatter file for sprd g901..please somebody tell me !!!!!
I have tried mutiple versions and countless drivers. Flashtool fails with the same error (2004) every time. I have changed computers, usb cables and windows version without success. Can someone please tell me if it is definitely possible to flash a Huawei Y330-U05 with these tools.
I cannot get pass the red progress bar. It immediately reaches 100% and stays there for 40 seconds and then reports failed to download.
hi guys i need urgent help
I tried to install the update for my phone cubot S308 and I follow all instructions in this page but I just can not, the red progress bar is full, drank the purple progress bar won't APPEAR. so I annulled the operation and disconnected the phone. then my phone never works and does not turn how set his .merci
Hello, It says the scatter file is wrong, but it comes from the same zip update
descargue el archino rom pero no tengo la clave para descomprimirlo…
Nice one… Keep it up!….
thanks