• Title: TWRP 3.0.2 Armor
  • Listed: 02/09/2017 11:16 pm
  • ROM Version: TWRP
  • You must be logged for ROM download.

Overall Rating : 2

3178 total views, 1 today

3 Total favorites


TWRP 3.0.2 Armor

Author adMember Info



TWRP 3.0.2-1 For Ulefone ARMOR

Available for ROM 1 v.1.0.6 and for ROM 2 v.1.0.7


Inside archives you can find MT6753_Android_ScatterTWRP.txt to use for Flash TWRP  and MT6753_Android_Scatter.txt to restore original Recovery Stock.


Don't use TWRP for ROM 1 on ROM 2 and Vice-Versa (don't work)

When Enter in TWRP at boot (Device OFF, Power and VOL+ same time, choose Recovery with Vol- and wait ) please flash  https://download.chainfire.eu/SuperSU  to have Root and no issue with BootLoop

Flash as usual using latest SP Flashtool.


Consider donate if i help you.

Stock Rom is here: https://www.needrom.com/download/ulefone-armor/


Thanks to jemmini, hanuma50, Carliv, TeamWinRecovery Project guys

※Please make a backup of your device before installing or updating ROM

Donate with PayPal to megthebest

2 Responses to“TWRP 3.0.2 Armor”

  1. 02/10/2017


    Hi, just a quick feedback: THANKS!
    I was able to finally root my Armor. Some hints for those who want to try the same too:

    1) FIRST download the SuperSU zip file and store it on an SD card and put that SD-card into the phone

    2) Install the correct TWRP recovery as described here:

    3) With phone still turned OFF, boot into recovery:
    This is done by pressing POWER and VOL-UP at the same time until you see a text boot screen (with very small font).
    Select "recovery" with VOL-UP, press "OK" with the VOL-DOWN button (as explained in the boot menu text).

    4) In TWRP recovery, install the SuperSU from the SD card in the phone as described here:
    Make sure to let the phone go though 2 or 3 reboots until it boots into Android as usual.

    WARNING: You may well lose all the stuff from the phone internal storage!

    If you run into trouble and can't turn off the Armor (because "remove battery" doesn't work) then hold POWER and HOME HARDBUTTON pressed together for about 10 seconds. Once the screen goes dim, immediately hold POWER and VOL UP until you see the recovery boot screen. From there, enter recovery again and follow hints for escaping boot loops (wipe dalvik, cache maybe required). See here:

    HTH, Thomas

  2. gocom



    Also Where U install SIM and SD card… There is a blank RESET/POWER off button.. Anyone know details about this?

Leave a Reply

You must be logged in to post a comment.