• Title: TWRP 3.0.2 & 3.1.1 – Ported for ZTE Blade A475 (AKA Telstra 4GX HD) (AKA ZTE Blade L4 Pro)
  • Listed: 04/13/2018 1:30 pm
  • ROM Version: 3.0.2 & 3.1.1
  • You must be logged for ROM download.


Overall Rating : 1


716 total views, 6 today

  

TWRP 3.0.2 & 3.1.1 – Ported for ZTE Blade A475 (AKA Telstra 4GX HD) (AKA ZTE Blade L4 Pro)
TWRP 3.0.2 & 3.1.1 - Ported for ZTE Blade A475 (AKA Telstra 4GX HD) (AKA ZTE Blade L4 Pro) - Image 1TWRP 3.0.2 & 3.1.1 - Ported for ZTE Blade A475 (AKA Telstra 4GX HD) (AKA ZTE Blade L4 Pro) - Image 2TWRP 3.0.2 & 3.1.1 - Ported for ZTE Blade A475 (AKA Telstra 4GX HD) (AKA ZTE Blade L4 Pro) - Image 3TWRP 3.0.2 & 3.1.1 - Ported for ZTE Blade A475 (AKA Telstra 4GX HD) (AKA ZTE Blade L4 Pro) - Image 4TWRP 3.0.2 & 3.1.1 - Ported for ZTE Blade A475 (AKA Telstra 4GX HD) (AKA ZTE Blade L4 Pro) - Image 5

Author adMember Info

Zillinium


DESCRIPTION


Telstra 4GX HD – MT6735P

ZTE Blade A475 – MT6735P

ZTE Blade L4 Pro – MT6735M

Please note the different HW CHIP ID's 

The Telstra 4GX HD is a rebranded ZTE Blade A475 with an MT6735 platform, The main difference between these devices is the inclusion of integrated graphics chips with the MT6753M Versions.

 

If you installed a custom rom built for the MT6753M onto the MT6735 or MT6753P then it'll most definitely cause Graphics errors, Lines on screen etc…

 

TWRP 3.0.2 & 3.1.1 – Ported for Telstra 4GX HD ( MT6735 )

Files Needed :

• SP Flash Tool version 5.16 or Above 

Here : https://www.needrom.com/download/sp-flash-tool-v5-1612

• MT6735_Android_Scatter.txt 

Here : http://www.needrom.com/download/mtk-scatter-builder-helper/

 

• ​TWRP 3.0.2.img 

• TWRP 3.1.1.img

Log in for links

 

INSTALL INSTRUCTIONS

 Get your Scatter file from here

https://goo.gl/oK5ZNb

 1) Download, Install and Open SP Flash Tool

 2) Download TWRP 3.0.2 or 3.1.1.img  and place it in the same location as your Scatter file

 3) Load your Scatter File in SP Flash Tool

 4) Select the recovery line in SP Flash Tool and then double tap location on recovery section, this allows you to select the image for installation on the recovery partition, Navigate to the desired TWRP.img and select it.

 5) now their is only one img to be flashed, this would be the recovery with TWRP set in path.

 6) Select Download Only as the Method of Flashing, Not Firmware Upgrade or Format All, this'll wreck your device.

 7) Turn your Telstra 4GX HD off andand remove the battery

 8) Place the battery back into the device but DO NOT turn it on yet

 9) Place a USB cable into your PC, but not into the device yet

 10) Now click Download in SP Flash Tool

 11) Now plug your other end of the USB Cable into the Telstra 4GX HD while it is switched off.

 12) Flashing will have commenced and you'll see OK

 13) After flashing says OK you should unplug your USB Cable and then Plug It Back In ( this allows SP Flash Tool to reinitialize your device ) 

 14) After your device charging screen appears, you can safely remove the USB Cable and turn on the device

BOOT RECOVERY

 1. Turn off you device

 2. hold volume down and power button simultaneously until you see the black boot screen asking the method of booting

 3. Press volume down until you reach Recovey and then press volume UP to select it.

RECOVERY will Boot

WARNING

• • To install Superuser you should accept the first page of twrp asking for system modification permissions, and then install the latest flashable supersu.zip from @Chainfire 

I'll add the exact version i used on my Telstra 4GX HD in links.  

 

 Here's the collection of files i have for the Telstra 4GX HD  

https://goo.gl/oK5ZNb 

Includes PhilzTouch

 

DISCLAIMER

I TAKE NO RESPONSIBILITY FOR ANY DAMAGES AND/OR LEGAL ACTION THAT MAY RESULT FROM USING THIS GUIDE

YOU AGREE TO NOT HOLD THE PUBLISHER OF THIS POST AND IT'S ASSOCIATED FILES RESPONSIBLE OR LIABLE FOR ANY DAMAGES AND/OR LEGAL ACTION THAT MAY RESULT FROM USING THIS GUIDE.

 

 

DONATE TO HELP ME KEEP PORTING

BTC ADDRESS : 1BY58UXvFedHCGrthrj8TRXJqFkhYjUkjf

 



※Please make a backup of your device before installing or updating ROM


One Response to“TWRP 3.0.2 & 3.1.1 – Ported f”







  1. 03/16/2018

    Mexico

    alguien sabe si ahi una rom flasheable por twrp me super urge

     


Leave a Reply

You must be logged in to post a comment.