• Title: TWRP-3.1.0-Elephone-M3-Android_6.0
  • Listed: 06/11/2017 10:15 pm
  • ROM Version: 6.0
  • You must be logged for ROM download.


Overall Rating : 2


2357 total views, 2 today

  

TWRP-3.1.0-Elephone-M3-Android_6.0

Author adMember Info


DESCRIPTION


Recovery ported from P9000, assembled on the basis of the kernel of the firmware Android 6.0 20160721.
 #
List of changes
- added support for encryption of the "data" section;
- a full (extended) partition table is used;
- as well as: Link to the official website (English)

 #
Modifications
In this assembly, the author (jemmini) changed some of the default settings:
- the Russian language is selected at the start;
- the time zone of Moscow is set and there is no "summer time";
- 24-hour time format is selected;
- vibration is turned off when the buttons and the keyboard are pressed;
- reduced the initial level of brightness;
- the "TWRP App" option is not checked and its installation is not offered upon reboot.
- and some other changes …

 #
Setting the B / W Flash Tool
1. Unzip the file you just downloaded.
2. Run the Flash Tool, Click "scatter-loading" and select the scatter file from the newly unpacked folder.

3.Sewn into download mode only.
4. Press download, turn off the phone and connect to the PC.
5. And wait for the recovery firmware to finish, until the green "OK" icon appears.

 #
Installing the TWRP
1. Copy the file recovery.img to the root of the SD card or internal memory.
2.Remove the image recovery.img-Installation-press Img-select our recovery.img-select the partition for flash-image firmware.



※Please make a backup of your device before installing or updating ROM


Donate with PayPal to aserge

Donate with YANDEX to aserge


4 Responses to“TWRP-3.1.0-Elephone-M3-Android_6.0”







  1. 07/22/2013

    Hello,

    actually its not possible for me to flash this. I tried several times with SP Flash tools. My Elephone M3 is rooted and a few weeks ago it was also possible to flash the phone. But now …. see picture :-)

     

    SP Flashtools is doing nothing. And the phone is charging after a few seconds.

    My first idea is that boot is corupted?

    USB debuging is on.

    Windows is not detecting the phone correct. The USB Board is changed (Hardware)

    Any idea?





  2. 06/16/2013

    Belarus

    I hope you were setting it Tacca this rekaveri tested more than once, it is efficient and can not cause harm to the rest of softwares telefona.Nuzhno sewn into download mode only.To that you describe could happen if pierced in another mode, for example, if you pierced in firmware Upgrade mode or Format all + Download-even in these conditions need to complete firmware flashing only in extreme sluchayah.V your case, you need to flash the drain full proshivku.A general I vylazhivayu only files (and free) and is not required to nikokgo OCU amb use them, for this is much more specialized forumy.Est firmware for this phone, but most will not vylazhivat-lost the desire.





  3. 06/16/2013

    Belarus


Leave a Reply

You must be logged in to post a comment.