• Title: TWRP 3.1.1 (BL5000)
  • Listed: 09/22/2017 10:39 pm
  • ROM Version: TWRP 3.1.1
  • You must be logged for ROM download.


Overall Rating : 3

629 total views, 1 today

5 Total favorites

237 Total downloads

  

TWRP 3.1.1 (BL5000)

Author adMember Info


DESCRIPTION


DOOGEE BL5000 TWRP 3.1.1

Обязательно разблокируйте загрузчик !!!

Восстановление основано на прошивке ядра Android 7.0 версии DOOGEE-BL5000-Android7.0-20170811 

Руководство:

ATTENTION!! After the installation of the recovery, under the condition of allowing changes in the system, it is necessary to install SuperSU, otherwise the system will not boot .

1. To install TWRP, you must unblock the boot loader. As a result of unlocking you will receive a completely clean phone: all user data and programs will be erased! In the "Settings" menu of the smartphone, activate the "For Developers" menu (usually by repeatedly clicking on the build number in the "About phone" tab) and select from the menu "Enable Factory Unlock" and "enable USB debugging". Switch off the machine.

2. Put the device in the "fastboot" mode by pressing the key combination up and power off from the turned off state, selecting from the appeared text menu bootloader option "fastboot".

3. Connect the smartphone cable to the USB port of your computer (in the Device Manager, the Android ADB Interface device should appear), set the required ADB drivers and unpack the archive into the ADB folder, which should be in the root of the C drive

4. Run the command line and type in it

cd c: \ ADB

5.After enter enter the command:

fastboot devices

if everything is installed and connected correctly, as a result of the command you will have to get the output of your smartphone's line:

0123456789ABCDEF fastboot

6. Enter the command to unlock the bootloader:

fastboot oem unlock

On the smartphone screen, you will be prompted to confirm the unlock by pressing the volume up. Press the volume up.

7. Reboot your smartphone using the command fastboot reboot

Wait for the system to boot up, then turn off the smartphone and again call the "fastboot" mode by pressing the key combination up and down power, selecting from the appeared text menu bootloader option "fastboot".

8. Copy the image TWRP_BL5000.img to the folder with ADB-utilities.

At the command prompt, type:

fastboot flash recovery TWRP_BL5000.img

9. Turn off the power of the smartphone while holding the power button for a long time.

Call the loader menu by pressing the volume up keys and power, selecting from the appeared text menu bootloader option Recovery and log in TWRP.

Install SuperSU and reboot into the system (SuperSU installation options can be installed from an external card, or after format via a usb cord using pc)

If twrp at startup asks for a key (password), it means that the data partition is encrypted. It is treated by formatting the Data section

 

 


Donate with YANDEX to kentst

Share Button

※Please make a backup of your device before installing or updating ROM

6 Responses to“TWRP 3.1.1 (BL5000)”







  1. 08/15/2015
    Posts: 14

    Nigeria

    Can't download, there's a ref attached to the link 





  2. 12/11/2014
    Posts: 23

    Turkey

    Thanks  bro working good work….





  3. 08/15/2015
    Posts: 14

    Nigeria

    I've tested it and it worked fine… Is it Jemini who ported it?if so you should give proper credit.

    I was unable to flash it with SP flash tool. After some work around I was able to do that but the problem is that I could only flash it with SP flash tool when the bootlader is unlocked. Am working on been able to flash twrp recovery straight from SP flash tool with locked bootlader. That will take some time but hopefully I can achieve that





  4. 09/24/2017
    Posts: 1

    Argentina

    hello, i can´t install correctly the drivers… how to install the drivers? i can't do :/

     





  5. 03/30/2017
    Posts: 6

    This worked fine for a while, but after testing with Viper4Android I tried to enter again into recovery just to flash a zip, but it keeps booting TWRP again and again without showing the menu.

    I tried to flash again the recovery via fastboot, even I did a "fastboot recovery TWRP_BL5000.img" but the result was the same, a "TWRP bootloop". I can boot into system ok and the phone is still rooted, but I've lost this recovery. Any ideas?


Leave a Reply

You must be logged in to post a comment.