• Title: SHARP Z2/A1 TWRP
  • Listed: 12/17/2020 5:50 pm
  • ROM Version: 3.2.1-1 and new 3.4.0 9
  • You must be logged for ROM download.

Overall Rating : 6

6861 total views, 2 today

1 Total favorites


SHARP Z2/A1 TWRP - Image 1SHARP Z2/A1 TWRP - Image 2SHARP Z2/A1 TWRP - Image 3SHARP Z2/A1 TWRP - Image 4SHARP Z2/A1 TWRP - Image 5SHARP Z2/A1 TWRP - Image 6SHARP Z2/A1 TWRP - Image 7SHARP Z2/A1 TWRP - Image 8SHARP Z2/A1 TWRP - Image 9

Author adMember Info



TWRP 3.2.1-1 port Miui Hellas TEAM (my logo and splashlogo)

TWRP 3.4.0_9  with OMNI sources.

 Attention, please!

Unlock phone / template, PIN or password /

Unlock bootloader, instructions below ⇩

Unlocking the bootloader must completely erase all data from the device! You will lose programs and data!

After downloading TWRP click on "Data Format"

ADB daemon – ADB Run is recommended in Windows 10, manually https://forum.xda-developers.com/android/general/adb-run-perfect-tool-android-t3580575

Exit ADB Run: exit ◄ Enter ˃ adb kill-server ◄Enter

Download and move recovery.img to the ADB folder. Download my special ROM on the external SD card:

  1. https://www.needrom.com/download/sharp-z2/ for newrecovery - variant ROM SHARP A1/Z2 V4A
  2. https://www.needrom.com/download/sharp-z2-with-magisk/




1. USB Debugging – On your phone go to Settings > About phone > Tap on Build number 7 times. This will enable Developer options. Now go back to Settings > Developer options > Enable USB debugging

2. Enable OEM Unlocking – On your phone go to Settings > Developer options. Then enable the 'OEM Unlocking' option

3.Connect your smartphone  to your computer with a USB cable. Change the USB mode to “file transfer (MTP)” mode.

In the Command Prompt window, enter the following command to launch the ADB daemon: adb devices

On your phone’s screen, you should see a prompt to allow or deny USB Debugging access. Naturally, you will want to grant USB Debugging access when prompted (and tap the always allow check box if you never want to see that prompt again).

Run the following command:

adb devices ◄Enter

adb reboot-bootloader ◄Enter

fastboot devices ◄Enter

fastboot oem unlock  ◄EnterPress on the device the " Vol+" button

fastboot getvar unlocked ◄Enter - fastboot unlock?

fastboot flash recovery recovery.img ◄Enter

fastboot boot recovery.img ◄Enter

Now disconnect your device from your computer. If you want to turn off the device press and hold on the device the Power button to fade out the screen. Press and hold on the device the Power button, and «Vol button until the phone vibrates and appearance of the logo «powered by Android» Format data in TWRP.

Install ROM or SuperSu.zip !






TWRP 3.4.0_9  (with OMNI sources)

  1. Download the newrecovery.img file for your device.
  2. Boot your device into TWRP custom recovery.
  3. Select Install, then browse for the download image file. Keep in mind you will have to tap on the Images button in the bottom right corner first in order to display .img files on the list.
  4. Now select the TWRP 3.4.0_9  newrecovery.img file, then select Recovery partition.
  5. Now swipe right to confirm the installation.
  6. Reboot to recovery, it should have been updated.

※Please make a backup of your device before installing or updating ROM

Donate with PayPal to taras-fedora-syn

13 Responses to“SHARP Z2/A1 TWRP”

  1. 01/04/2015


    Çok teşekkürler çalışıyor .

  2. 01/20/2018


    Newbie here could you please make a video tutorial

  3. arisidik


    why this happend to me,,,

    can you help me plissss

  4. 04/03/2019

    Thank you very much buddy!

    Only one little annoying message when I'm booting the device appears saying that my device is not trusted. How could I remove or just hide that message?

  5. 08/17/2019


    Cara meu unico problema é o tal do *daemon 5037*  que não reconhece o telefone ai não da pra instalar o twrp …


  6. 03/24/2020


    Help. My FS8002 stuck on "orange state, your device has been unlocked and can't be trusted. Your device will boot in 5 seconds"

    what should I do?

  7. 06/27/2020


    help stuck in waiting devices

Leave a Reply

You must be logged in to post a comment.