- Title: Twrp Umidigi F1
- Listed: January, 2019
- Last modified: 01/30/2019 1:21 pm
- Version: Twrp v.3.2 (ver a & b)
You must be logged for ROM download.
13307 total views, 2 today
1 Total favorites
DESCRIPTION
Twrp for UMIDigi F1 (128gb Rom, 4gb Ram)
Twrp 3.2 ported for new device
Version A = Traditional Twrp
Version B = Twrp By material design
A) Procedure For Flashtool :
Copy and replace the original in the firmware folder
Run flashtool and select the scatter of the firmware of Umidigi F1
Flag only the recovery and make download and now connect the usb cable with the device…take the button of volume + in the same time….when the progress of flash in flashtool start release the button level volume +….
To obtain The Right Root on the 6771 Mtk Device follow these instructions:
Install:
1) Copy to Micro SDCard the file "Magisk-v17.3.zip"
2) Flash the "recovery.img" using SP FlashTool
3) Wipe Data 2 times and enter always after reboot in recovery twrp
(do not reboot in system android)
4) reboot and reenter in twrp mode and Install Magisk.17.3.zip
5) Reboot to the Android System
6) to receive right root at 100% in the play store install Busybox app and install after installed the app the binary in partition system.
Probably magisk version 18 is not good for this device use magisk 17,X.zip version
New Details
1) Set up the english language like default;
2) Change colors menu.
3) New Kernel inside
Many Thanks to Jemmini
Many Thanks to Iceman
Many Thanks to bencebacsi the Admin of the Umidigi Official Forum
Of Course many thanks to SOCRATE the Great Admin of Needrom
※Please make a backup of your device before installing or updating ROM



Member Info
error: status_sec_imghdr_type_mismatch (0xc0020029)
Verified boot is enabled
please download signed image (recovery-verified.img) or disable verified boot
qualche soluzione?
Can flash Magisk in TWRP, but system dont get root and magisk. Try to patch boot and flash with flashtool, but dont work too…. I think that is a encription problem. Twrp or disable encription-zip dont work properly.
Thanks for your work.
Encountered this (also in attached image): ERROR : STATUS_PRELOADER_INVALID (0xC0030004)
Any thoughts? My bootloader is unlocked; the Umidigi screen has some small text saying "Your device has been unlocked and can't be trusted".
Belay my last; all it took was using a more up to date version. (5.1808 versus 5.1904).
Having problems. I'm trying to install images in TWRP but there are only three partitions visible: nvram, Boot, and Recovery. Each of those are too small to actually install ROM images. The actual storage is not an option.
Hi. After I flash the recovery (need to press Vol + while you connect the phone to start flashing) I can't enter Recovery mode… after the 5 seconds warning it reboots
1 I flash the recovery
2 unplug the phone
3 Vol + and Power
At this point I've tryed diffrent combinations Vol ( + ) and power after 10 seconds holding them my phone restarts. If y relese the power button while still holding Vol (+) the phone also restarts after the 5 second delay orange warning.
Now I'm Redownloading test1 and test2 recoveries since I've had corrupted files in my downloads these last days
gargamel Thanks for your answer on xda, ghost45 for the recovery and Veiran for his coments here and there
Edited: Yep.. was corrupted files!!! have TWRP now. Hope you people are still around if more problems apear
Who can build stock roms like pe los
Thank me later, hold only the + and then plug you usb cabel in your phone, wait and SFTP will download it.
Btw i test magisk v19 and work for me perfect
Can you please explain step by step on how to install this on the UMIDIGI F1. I cannot install this and some what confusion. Please help
Also where is the scatter file for the UMIDIGI F1? I only see for the MT6771