- Title: UMIDIGI F1
- Listed: March, 2019
- Last modified: 03/01/2019 1:11 pm
- Version: ROM Android 9.0
You must be logged for ROM download.
10132 total views, 3 today
1 Total favorites
Member Info
DESCRIPTION
ROM Mobile UMIDIGI F1 – ROM Android 9.0
ONLY MT6771
ROM 1 (EU) – Official ROM UMIDIGI Version: UMIDIGI_F1_V1.0_20190125_20190301 - F1_EEA-user 9 PPR1.180610.011 – FlashTool
—————————————————————————————————————————————————————————————
ROM 1 (EU) – Official ROM UMIDIGI Version: UMIDIGI_F1_V1.0_20190125_20190301 - F1_EEA-user 9 PPR1.180610.011 – Service(ota)
————————————————————————————————————————————————————————————-
ROM 2 - Official ROM UMIDIGI Version: UMIDIGI_F1_V1.0_20190124_20190228 - F1-user 9 PPR1.180610.011 – FlashTool
————————————————————————————————————————————————————————————-
ROM 2 - Official ROM UMIDIGI Version: UMIDIGI_F1_V1.0_20190124_20190228 - F1-user 9 PPR1.180610.011 – Service(ota)
Gapps include - No Rooted
Language support : Multilang
Install ROM Flash Tool:
- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6771_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Firmware Upgrade"
- Turn off your phone (and don't turn on the phone).
- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !
- You can now safely disconnect your phone and turn it on.
Install "Service Ota" from Recovery: Firmware "Service ota" for rebuild bricks!
Copy the …target_files.zip file to your SD card. You need a microSD card(with at least 4GB capacity)
Press and hold the volume-up and power buttons together until your phone restarts (the boot screen is displayed), then immeduately release the power button and keep only the vol-up button pressed until your phone boots into recovery. It needs about 10 seconds or a little bit less if your phone was already powered off.
Here you can see a lying android figure with an exclamation mark in red triangle on its tummy and 'No command'.
Press and hold the power and vol-up buttons (in this order) together, then release first the vol-up button to call the recovery menu. Now you can move with the volume buttons and select an item with the power button.
Move to ‘Apply update from SD card’ and select it.
On the next screen brows for the update file and select it. The updating process will start and needs a few minutes to be finished.
After a succcessful installation you can read the ''Install from sdcard complete'' message and the receovery menu is available again.
Select 'Reboot system now'. Alternatively you can perform a factory data reset here by choosing 'Wipe data/factory reset'
※Please make a backup of your device before installing or updating ROM
Aw, really? Account Premium to access these? The version from a month ago wasn't behind the paywall…
please i have flashed a previous stock rom of Umidigi F1 but i have chinese characters on the top right part of my screen showing TEE : [chinese characters] and just under it is Google : [chinese characters]. I have attached a screenshot showing the characters. Please how do i fix this? Does this have to do with the ROM and is there a particular ROM version that i can flash without these characters?