• Title: [UNBRICK] ASUS ZENFONE GO ZC500TG-Z00VD
  • Listed: 02/10/2017 6:04 pm
  • ROM Version:12.1.0.25
  • You must be logged for ROM download.


Overall Rating : 5

5281 total views, 6 today

8 Total favorites

  

[UNBRICK] ASUS ZENFONE GO ZC500TG-Z00VD

Author adMember Info

samin sikong


DESCRIPTION


1. Install MT VCOM port driver first (choose wether your operating system under 32bits or 64 bits)
2 .Open SP FLashTool (as administrator);
in Scatter Loading File open the folder ASUS ZenFone Go (ZC500TG) Kernel Code (v12.1.0.25) text document MT6580_Android_scatter.txt
3. Select action: Download Only
4. Press Download button and wait the bottom line be colored to show the loading entire files.
5. Take out the battery in 30 seconds 
6.Insert the battery and connect USB cable from phone to the computer while holding the volume down(-). 
7. After finished and the Green Circle check mark will appeared, you can unplugged the phone from the computer and run it (take out battery &reinsert if necessary)

 

Done!

ps: The first launch is always long! just wait patiently

 


Share Button

※Please make a backup of your device before installing or updating ROM

71 Responses to“[UNBRICK] ASUS ZENFONE GO ZC500TG-Z00VD”







  1. 03/26/2017
    Posts: 2

    Colombia

     

    Hello friend, I have a problem with my asus zc500tg, an error appears in flash tool (6045). Does not leave my mobile flash, need your help, and I followed all the steps in the post …

    I need the latest or stable firmware !!! thanks





  2. 04/19/2017
    Posts: 2

    Italy

    Plz restore it

    Plzzz 

  3. samin sikong




    07/29/2015
    Posts: 81

    Alternative link:
    http://www.mediafire.com/file/0s545wpdcksm3dz/ZC500TG_Kernel.zip

    ps: sorry for the dead link 

  4. samin sikong




    07/29/2015
    Posts: 81

    Instructions:
    1.Install driver (vcom driver)
    2.I used windows 10 (for me more easier than previous windows such as win7)
    3.Download, SP_Flash_Tool_exe_Windows_v5.1515.00_temp_Secure_boot
    4.Download kernel firmware v12.1.0.25
    5.Flashing as usual,
    …open SP Flashtool
    …locate MT6580_Android_scatter.txt
    …Set actions as Download
    …Button DOWNLOAD…click start

    loading actions in progress…

    …For your phone,
    …Make sure enough battery (for me let it charging full)
    …Take out battery &reinsert back
    …Now, Connect CABLE to your phone
    …press Volume down button (hold it)
    …Then plug-in USB head cable into USB PC/laptop port (make sure DOWNLOAD button clicked)
    …Wait till phone connected into spflashtool- And you may release volume down button
    …After detected, flashing process should be begin.

    Wait until finished (Green Circle)

    >>Take out battery &reinsert, now your phone should be boot up as usual. It takes time to
    for first time to finished reconfigured settings. Be patient.

    Done! (good luck)





  5. 04/19/2017
    Posts: 2

    Italy

    Guys this guy is a legend!! 

  6. samin sikong




    07/29/2015
    Posts: 81

    Note:
    *****
    …Link already updated
    …SPFLASHTool added (Thanks to Pietorgay to let me know)

    PS: Just be patient :)





  7. 03/14/2014
    Posts: 3

    Indonesia

    Thanks Mr. Samin Singkong.. Work fantastic





  8. 04/20/2016
    Posts: 3

    Bangladesh

    lets see its work or not





  9. 04/20/2016
    Posts: 3

    Bangladesh

    thanks boss its work 100%





  10. 06/08/2016
    Posts: 4

    Indonesia

    pls dont upload to mediafire that site is unreliable 


Leave a Reply

You must be logged in to post a comment.