Welcome, visitor! [ Register | Loginrss

  • Listed: 03/17/2016 7:21 pm
  • ROM Version: 20160223
  • You must be logged for ROM download.

Overall Rating : 7

5036 total views, 2 today

6 Total favorites


Info Build Original DOOGEEInfo Xposed Installer - 1Info Xposed Installer - 2SUPERSU V2.65Team Win Recovery Project - Multilanguage - V3.0Team Win Recovery Project - Multilanguage - V3.0Version origonale DOOGEE - 09.03.2016Xposed Framework - V79Xposed Installer + SUPERSU

Author adMember Info



ROM OFFICIAL Doogee + Tuto utility for repairing a bricked phone ( with utilities and files to "Root", recovey "TWRP" and "Xposed" )

=> Hello everyone ;-)
Following mishandling on my phone I ended up completely block it ("Bricked").
My phone is therefore starting up at all (black screen), I had no more ability to access
mode "Recovery" and when I connected the charger to charge my phone I had no reaction to it: – (
So I researched different websites and emailed to the service after sale Doogee who kindly provided
different files and utilities to repair my phone (thank you to them;-)
It took me quite a time to repair my phone, I'll call you available the results of my research
in case you find yourself in the same situation;-)
Hope this can help, friendly, Yannick IDF

※Please make a backup of your device before installing or updating ROM

Donate with PayPal to yannickidf


  1. 12/02/2015


    Excellent you win a Oscar whith your dedication and talent to search all, thanks you so much, Really thanks u

    • yannickidf



      Thank you very much for your back, it makes me happy and rewarding time I spent on my research and their online ;-)
      For information and against it there's just a detail is missing and I forgot to mention in my Tuto.
      It concerns the IMEI No. of SIM card phone :-(
      Indeed, after the repair, these numbers have changed and no longer correspond to the origin of the phone :-(

      It does not bother me in France because everything seems to work fine (and 4G dual SIM OK), by cons and just for the "Fun" I tried to change to match the original ones with various programs (MTK TOOLS, MOBILEUNCLE, etc ..)

      But I did not succeed :-( :-( :-( If someone gets there I'm interested in the solution ;-) A +, YannickIDF ;-)

  2. 09/26/2014


    Hello YannickIDF,

    all You have to do to change your IMEI is the following:

    1. Go to Engineering Mode with this code * # * # 3646633 # * # *
    2. Type it on call pad
    3. Engineering Mode show on your phone screen
    4. Go to CDS info
    5. Go to Radio info
    6. then go to Phone1 (For the first IMEI No)
    7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
    8. Hit send command
    9. If you done just reboot the phone
    10. If you change the second IMEI No then go to step 2 and select "Phone2"
    11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
    12. Hit send command
    13. Reboot your phone



  3. 07/04/2015


    thank u very much Yannick but this didn't work for me and i'm downloading the second compressed file!!^^
    is there a difference between them?? :o

  4. 02/16/2016

    Czech Republic

    Hello Friend Please potrebuju necessarily get some phone Doogee valencia2 Y100 PLUS nowhere it can not find a phone just is not black screen after a bad tackle firmware please help

  5. 09/10/2015


    Thank you so much

  6. 11/07/2016


    GRANDEEEEE !!! yannickidf

    the best toolkit i see ever for this smartphone,

    My experience…. if your y100pro has not recovery installed try option 2 :

    charge scatter

    unmark all options

    mark PRELOADER

    connect the y100pro with vol – hold battery out

    wait to appera ok popup

    disconnect y100pro

    put the battery

    mark all options

    connect the phone and voila y100pro stock rom  !!!



    SP Flash Tool Errors – 21 BROM Code types

    1. Error : Phone is dead and your mobile device no longer respond on Power button

    Fix : Ensure flash suitable ROM file for your device, re flashing will fix the error unless you have hardware issues.

    2. Error : Phone does not work after flashing -Successful flashing but stuck on boot logo.

    Fix : Try to upgrade / use firmware upgrade button, or try to get another ROM that suitable with your device.

    3. Error : Post flashing Phone – it shows white screen, strange colors or divided screen. Your phone respond to the button, and you can hear the sound but blurry with white screen.

    Fix : The ROM / Firmware that you flashing to your device is incompatible with your device, try find from another source and try.

    4. Error : Phone recur disconnect during flashing – Your mobile  keep disconnecting just as flashing process begin, interrupt the flashing process

    Fix :  Try with a different USB cord and USB port. You can try flashing the ROM without battery or try holding volume down button while connecting the phone to PC for flashing.


    5. Error Flash tool keeps on 0% – SP Flash Tool installation hangs at 0 %

    Fix : Your device just only show charging signal, this mean the necessary drivers is not installed properly. So re-install USB VCOM driver and make sure it installed completely.

    6. Error 4032 – BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail

    Fix :  Ensure that the files you are trying to flash are exact version of your phone model. If so, now try to formatting your phone but do not format the boot loader before flashing it. Sometimes, device that produce in 2014 also result this error code, solution is download preloader and move it to target_bin folder and rename or move checksum.ini from target_bin.

    This would be the best solution for BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail, SP Flash Tool is unable to enable DRAM or communicate effectively with your device issue.

    7. Error 5054 – BROM ERROR S_DL_GET_DRAM_SETTINGS_FAIL (5054)

    Fix : Need to Check load matches your target which is to be downloaded. For more info, that the file you’re trying to flash do not belong or not compatible with your phone. Verify that you are using the right version of files for your device. If so, try to formatting before flashing again.

    8. Error 5056 – BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069),

    Fix : It means that the files that you are trying to flash is larger than the available space or your device partition, Ensure the files that you are trying to flashing is exact for your device model, try another ROM

    9. Error 1022 means Version SP flash tool doesn’t match with your mobile phone or the USB interface doesn’t work well.

    Fix : Do Change to another USB interface. Sill does not work then download the latest version of sp flash tool instead.

    10. Error 1040: S_UNSUPPORTED_OPERATION flash boot files Scatter.txt doesn’t match.

    Fix : Just download appropriate cable flash recovery file.

    11. Error 2005: S_BROM_CMD_STARTCMD_FAIL

    Fix : This error occurs that the incomplete load of the flash file,  Just reopen the sp flash tool, and keep on your flash process.

    12. Error 3144: S_DA_EMMC_FLASH_NOT_FOUND

    Fix : Flash boot files Scatter. TXT mismatch, ensure recovery file is the right one! Notice EMMC partition phone and MTD partition phone use different TXT boot file!

    13. Error 4004: Driver Error

    Fix : Try to install MTP driver, if does not work, Uninstall the driver and reinstall it again or reinstall your computer.

    14. Error 4032: Operation Skill Problems

    Fix : Press the volume down button (key to reduce volume), then it can trigger the yellow bar progress continue. You’d better install batteries in your mobile during flash process.


    Fix : Error appears when import boot file TXT. You need to check whether the file is the correct one or not, and operate again.

    16. Error 8038: SP FLASH TOOL ERROR

    Fix : If you encounter this error, you need to click the “firmware-upgrade” to start flash. Also the version of SP flash tool is not match with your phone.

    17. Error 8100: Cannot find USB port! This is because of the driver is not recognized completely or not install completely.

    Fix : Reinstall the driver and restart. Try to Change to another PC or desktop.

    18. Error 8200: OS of your mobile phone is not the same chip platform with your recovery file.

    Fix : 1. Find the right recovery file. 2. Update to the latest SP flash tool.

    19. Error Initialize scatter failed : Initialize scatter file failed. Please check the scatter file name you load is legal, SP flash tool does not accept the name format of scatter file, folder and everything that link to scatter file.

    Fix : Make sure scatter file, folder and etc have legit name format, without contains any unique character.

    20. Error 8038 Android download pmt is ready and layout has been changed, this mean SP Flash Tool is having problem writing to device partitions due to some incompatibility

    Fix : Format your device, but don’t format the bootloader and then try to flashing files again using download button, but sometime firmware ? upgrade button solve the problem.

    21. Error 4008 Stopped at the purple bar after the finish of red bar.

    Fix : Take out the battery, and reinstall, enter into REC and choose turn the phone off. Then flash again.


  7. 12/06/2016

    Costa Rica

    Hi, i have another error … i make the process fine, but when i want to turn on my device, and can´t see anything in the screen, help me please

  8. 01/27/2017


    Merci Yannick pour cette compilation très bien faite !

    La dernière version de la ROM dispo sur le support de Doogee m'avait planté le téléphone. J'ai pu le remettre en service et le rooter grâce à ton tuto :)

    Encore merci pour ce partage très utile !

  9. 02/09/2017


    hay algun tutorial 

  10. 10/08/2016


    Amazing , now my phone is alive.Thank you for great work.From Doogee site firmware is not good for it !

Leave a Reply

You must be logged in to post a comment.