- Title: VIBEUI_V2.5_X2-CU_X2-AP_ROW_S223 multilanguage
- Listed: April, 2016
- Last modified: 04/09/2016 4:50 pm
- Version: 5.1.1
You must be logged for ROM download.
27224 total views, 7 today
12 Total favorites
Member Info
DESCRIPTION
Android 5.0 VIBEUI_V2.5_X2-CU_X2-AP_ROW_S223 multilanguage for VIBE X2-CU under the SP FlashTool
(Note when updating your phone will change the name of your model on the X2-AP. But it does not matter. A priori, you get to a full-fledged OTA update)
problems and their solutions!
If you do not see the network simkarty
If you do not see the network simkarty:
1) If you have a device X2 something that's sew the patch Patch_TO-modem_for_X2-AP_ROW_S223.zip.
2) If the unit X2-CU then put a patch of TWRP Recovery This patch Patch_CU_modem_for_AP.zip
If you are after the firmware and wipe all the engine does not move vayfay
If you are after the firmware and all the wipe does not shift engine vayfay – means your unit has a configuration different from the bulk (there is a small percentage of all versions of this model CU / AP / EU?) All currently available versions of Android 5.0 will not work correctly on your machine. (No reboot vayfay.vlyutuz.chastye) solution: Sew 4.4.2 and wait until Lenovo android hone to the desired versatility.
※Please make a backup of your device before installing or updating ROM
Cool, it worked. Just as a note, it's 5.0, not 5.1.1. Done on a Lenovo Vibe X2-CU with KitKat.
How do I install this ROM ?
Thanks
Dear Friends, my phone is Vibe X2-CU, but I have uodated it with this firmware. Everything work well, but sometimes it can't recognize the network. I have dusl sim version, and one of the sims have problems, so i have remove the sim and put it back several times, and then it works, but after I restart my phone, it dissapears again. How to solvbe this problem, and what shall id do with TWRP Recovery (Patch_CU_modem_for_AP), how to install it, please advise step by step instructions. thanks in advance.
Hola, alguien sabe si funciona el 4G con esta ROM?
can anyone confirm that VIBEUI IS VERSION 2.5?
I have Vibe x2-cu model. I was able to install successfully by following the steps below. I'm am not sure if it will work for others. Do it @ your own risk.
After downloading the ROM:
1. Run flashtool.exe
2. Under "Format Tab" select "Format whole flash except Bootloader"
3. Turn off phone and connect to PC
4. Press "Start"
5. One done go to "Download Tab"
6. Choose the Scatter file from folder "target_bin"
7. Select "Downlolad Only"
8. Press "Download"
9. Once done start your phone
10. Download KingrootSetup for Windows and install in PC
11. Run the Kingroot app in PC
12. Connect your phone to PC and enable USB debugging
13. Start the rooting procedure in PC
14. Once rooted, disconnect phone & install flashify(for root users) from Google Playstore
15. Extract "recovery.img" from TWRP_3.0.0.01.zip and copy in your phone
(TWRP Recovery для Lenovo Vibe X2 EU from needrom.com)
16. Open flashify app, touch "Recovery Image" and open the "recovery.img" that was copied in your phone.
17. TWRP will be installed
18. Copy files "TWRP-X2-CU_1520_modemfiles.zip" and "TWRP-X2-Generic_NVRAM.zip" to your phone
(http://forum.xda-developers.co.....t2897967/page28 (post #280))
19. Go to TWRP recovery (use flashify app> options> Reboot recovery)
20. In TWRP: Install> TWRP-X2-CU_1520_modemfiles.zip then
Install> TWRP-X2-Generic_NVRAM.zip
21. Reboot Done!
To install Xposed installer:
1. Download xposed-v86-sdk21-arm.zip and XposedInstaller_3.0_alpha4.apk (arm is the processor type; SDK21 for Android 5.0 )
2. Go to TWRP recovery mode and install xposed-v86-sdk21-arm.zip
3. Reboot the phone and installl XposedInstaller_3.0_alpha4.apk
4. Install "Fix Lollipop Memory Leak" from Google Playstore
5. Open xposed app and enable the modure "Fix Lollipop Memory Leak"
6. Install busybox from Playstore run it.
7. Activate the modules in Xposed and restart
8. Done!
I flashed my X2 CU with this rom and now it is bricked. Only boot loops with black screen, and the computer says that it doesn"t recognize usb device.
Can I install in lenovo x2-TO?
If you still have problem with SIM CARD, put your sim CARD in SLOT, and install MODEM PATCH by TWRP Recovery! You'll have signal, but dont work 3G or any conection!
Hello guys, I am new to this so I would like an advice about flashing your rom. Is this the latest rom for the Lenovo Vibe X2?
I have the X2-cu version of 4.4.2, do I have to change anything or I just have to flash the rom through SP Flash Tool? I am rooted by the way.
Thanks in advance, John